Installing and Running MTASA Server on GNU Linux

Installation

Main binary

Download the latest stable Linux binaries from here:

rm multitheftauto_linux-1.6.0.tar.gz
wget http://linux.mtasa.com/dl/140/multitheftauto_linux-1.6.0.tar.gz

Unpack into a directory:

tar -xf multitheftauto_linux-1.6.0.tar.gz

Default config

Download the default config files:

rm baseconfig-1.6.0.tar.gz
wget http://linux.mtasa.com/dl/140/baseconfig-1.6.0.tar.gz

Unpack and move into the deathmatch directory:
(Note: Only do this for new installations as it will overwrite any existing config files.)

tar -xf baseconfig-1.6.0.tar.gz
mv baseconfig/* multitheftauto_linux-1.6.0/mods/deathmatch

Test

You can now test if the server will start correctly, by entering the install directory:

cd multitheftauto_linux-1.6.0

and launching:

./mta-server

Default resources

If you need the default resources: Download the latest default resources zip from http://mirror.mtasa.com/mtasa/resources/ and unzip into mods/deathmatch/resources For example:

apt-get install unzip
mkdir mods/deathmatch/resources
cd mods/deathmatch/resources
rm mtasa-resources-r*
wget http://mirror.mtasa.com/mtasa/resources/mtasa-resources-rINSERT_LATEST_NUMBER_HERE.zip
unzip mtasa-resources-r*
rm mtasa-resources-r*

Running with 32 or 64 bit Linux

Make sure your server libraries and stuff are up to date

On Debian/Ubuntu this is done with:

apt-get update
apt-get upgrade

Running with 32 bit Linux

32 bit Troubleshooting

• If you get a problem with such as "libreadline.so.5: cannot open shared object file: No such file or directory.", it can be solved on 32 bit Debian/Ubuntu by doing this:

apt-get install libreadline5

• If you get a problem with such as "libncursesw.so.5 cannot open shared object file: No such file or directory", it can be solved on 32 bit Debian/Ubuntu by doing this:

apt-get install libncursesw5

• If you get a problem with such as "libmysqlclient.so.16: cannot open shared object file: No such file or directory", it can be solved on Debian/Ubuntu by doing this:

apt-get install libmysqlclient16

If that fails, download libmysqlclient.so.16 and put it in /usr/lib/

Running with 64 bit Linux

Debian 7 (wheezy) 64 bit

Before running MTASA Server, use this command line for installation of 32 bit libs :

apt-get install lib32ncursesw5 lib32readline5

Install 32 bit libs for your 64 bit distro

For 64 bit Debian 6, this is achieved with:
(Some 64 bit distros have 32 bit libs already installed for you. So this step might not be required)

apt-get install ia32-libs

64 bit Troubleshooting

64 bit Debian/Ubuntu

• If you get a problem with such as "libstdc++.so.6: cannot open shared object file: No such file or directory.", it can be solved on 64 bit Debian/Ubuntu by doing this:

apt-get install lib32stdc++6

• If you get a problem with such as "libz.so.1: cannot open shared object file: No such file or directory.", it can be solved on 64 bit Debian/Ubuntu by doing this:

apt-get install lib32z1

• If you get a problem with such as "libreadline.so.5: cannot open shared object file: No such file or directory.", it can be solved on 64 bit Debian/Ubuntu by doing this:

apt-get install lib32readline5

• If you get a problem with such as "libncursesw.so.5 cannot open shared object file: No such file or directory", it can be solved on 64 bit Debian/Ubuntu by doing this:

apt-get install lib32ncursesw5

• If you get a problem with such as "libmysqlclient.so.16: cannot open shared object file: No such file or directory", it can be solved on Debian/Ubuntu by doing this:

apt-get install libmysqlclient16

• • If that fails, download libmysqlclient.so.16 and put it in /usr/lib/

• • NOTE: If you are running the experimental MTA x64 server, you will need this file instead:

64 bit CentOS 6

• If you get a problem with such as "libreadline.so.5: cannot open shared object file: No such file or directory.", edit /etc/yum.conf and add this line:

multilib_policy=all

Then issue this command:

yum install compat-readline5

• Further 64 bit solutions can be found on the forums

MySQL Troubleshooting

• If you are using the inbuild MySQL functions such as dbConnect and dbQuery, you will need to have libmysqlclient.so.16 installed.
• If you can't get libmysqlclient.so.16 installed by conventional means, then try downloading the file from here and copying it to your Linux server /usr/lib/ directory.

Cent OS Troubleshooting

• If you are using Cent OS and you get something like /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by xmll.so) this can be resolved by doing downloading the archive [here] and unpacking it with the following command:

rpm2cpio libstdc++-4.3.0-8.i386.rpm | cpio -i --make-directories

Server crashes

If your Linux server crashes, please obtain a backtrace and post a report on our Bug tracker

Do you have a core dump file in the the MTA server directory?

It's usually called 'core', and usually over 100MB, and looks something like this:

If you have a core dump file in the the MTA server directory:

• Install gdb. To install gdb on Debian, use this command:

apt-get install gdb

• And from the MTA install directory do this command

gdb mta-server -c core

• When gdb launches, do this command to get a module list:

i sh

• And then this command to get a backtrace:

bt

• Save the output
• (To exit gdb, use the quit command)

If you do not have a core dump file in the the MTA server directory:

• Install gdb. To install gdb on Debian, use this command:

apt-get install gdb

• And from the MTA server directory start the mta-server like this:

gdb mta-server -ex "set print thread-events off" --eval-command run

• Now wait for a crash. (Ignore any weird screen output in the meantime)
• When a crash occurs, do this command to get a module list:

i sh

• And then this command to get a backtrace:

bt

• Save the output
• (To exit gdb, use the quit command)

Server freezes

If your Linux server freezes, please obtain a backtrace with thread information and post a report on our Bug tracker

To obtain a backtrace with thread information:

• Install gdb. To install gdb on Debian, use this command:

apt-get install gdb

• And from the MTA server directory start the mta-server like this:

gdb mta-server -ex "set print thread-events off" --eval-command run

• Now wait for a freeze. (Ignore any weird screen output in the meantime)
• When a freeze occurs, press ctrl-c to start gdb
• Then do this command to get a module list:

i sh

• And then this command to get a backtrace:

bt

• And then this command to get thread information:

info threads

• Save the output
• (To exit gdb, use the quit command)