HU/Debugging: Difference between revisions

From Multi Theft Auto: Wiki
Jump to navigation Jump to search
(Blanked the page)
No edit summary
Line 1: Line 1:
A szkriptekben gyakran előfordulnak kisebb nagyobb problémák, amelyeket nem veszünk észre!Ez a leírás segít abban hogy gyorsan megtaláld őket!


==Hibakereső konzol==
Az MTA tartalmaz beépített hibakereső konzolt!Hasznos mivel ha elgépelünk valamit és nem vesszük észre ő segítségünkre lehet.Ahhoz hogy tudjuk aktiválni ezt a jogusultságot Adminisztrátor rangot kell viselnünk{ACL}.Ha ez rendben van akkor a "debugscript x" parancsal tudjuk változtatni a visszajelzési szintet!
----
Lehetőségek:
* '''1:''' Csak a '''Hibákat''' jelzi
* '''2:''' A '''hibákat''' és a '''Figyelmeztetéseket''' is jelzi
* '''3:''' A '''hibákat''' és a '''Figyelmeztetéseket''' is jelzi illetve az '''Információkat''' amelyeket elrejtünk a szkriptekben!
Ha begépeljük a "debugscript 3" parancsot akkor a fent leírt paramétereket fogja megmutatni.Ez a legcélszerűbb funkció, sokkal egyszerűbb vele a fejlesztés
===Példa===
Ebben a kódban elrejtettünk két darab hibát:
<syntaxhighlight lang="lua">
function Koszones(message, player)
    if (getPlayerName(player) == "Józsika")
        outputChatbox("Szia Józsika")
    end
end
addEventHandler("onChatMessage", root, Koszones)
</syntaxhighlight>
Ha ezt a kódot lefuttatjuk akkor ezt a hibaüzenetet fogjuk kapni:
:{{Debug info|Loading script failed: myResource\script.lua:2: 'then' expected near ´outputChatbox'}}[Ezt nem fordítom le]
This means the script could not be parsed because there was a syntax error. It shows the script path relative to the resource directory so you can identify to script where the error originated from. After the filename it shows a colon and a number, this number presents the line number - this is so you can find out where in your script the error is - it is very helpful for large scripts. After that is the error message, which varies depending on the error made. Looking at the error message, we can easily determine that the error originated from the resource '''myResource''' and line two of the script file '''script.lua'''. The error message is very clear, we forgot the "then"! We can easily fix that!
<syntaxhighlight lang="lua">
function SayHello(message, player)
    if (getPlayerName(player) == "Fedor") then
        outputChatbox("Hello Fedor")
    end
end
addEventHandler("onChatMessage", root, SayHello)
</syntaxhighlight>
Now the script will load fine and won't output any errors until a player with the name 'Fedor' says something in the chat. At that moment, the debug console will output:
:{{Debug error|myResource\script.lua:2: attempt to call global 'outputChatbox' (a nil value)}}
This error means that the function '''outputChatbox''' is a nil value, that is - it doesn't exist! This is because the function is actually called [[outputChatBox]], not [[outputChatbox]] - take care of that capital B.:
<syntaxhighlight lang="lua">
function SayHello(message, player)
    if (getPlayerName(player) == "Fedor") then
        outputChatBox("Hello Fedor")
    end
end
addEventHandler("onChatMessage", root, SayHello)
</syntaxhighlight>
Of course, this is just an example and I've only skimmed the surface of error messages. There are plenty of other messages and scenarios, but you should get the general idea.
==Server & client debug logging==
====Server====
Navigate to: ''(MTA root folder)>server>mods>deathmatch''
There are two nearly identical files:
*The local.conf is the settings for the "host game" menu item in the main menu of MTA. This is a quick and easy way of starting a temporary server from inside the client. When the client is turned off the server will also turn off.
*The mtaserver.conf is used when "MTA Server.exe" is executed from (MTA root folder)>server. This runs the server in its own console window which does not need the client to exist or to be run. This is can be useful if you're interested in hosting servers for a longer time period or if you want to experiment with a real world console.
Depending on which way you host, you will want to edit those files. The settings in question are:
<syntaxhighlight lang="xml"><!-- Specifies the location and name of the debugscript log file. If left blank, server won't be saving this file. -->
<scriptdebuglogfile>logs/scripts.log</scriptdebuglogfile>
<!-- Specifies the level of the debugscript log file. Available values: 0, 1, 2, 3. When not set, defaults to 0. -->
<scriptdebugloglevel>0</scriptdebugloglevel></syntaxhighlight>
You want to make sure you have a log name specified. Also you want to specify what level of errors will be logged. If it is 0 nothing will be logged. The levels were explained at the top of this article. If the logging level was changed to 3, then in this case all '''serverside''' script errors log to (MTA root folder)>server>mods>deathmatch>logs>scripts.log
====Client====
Navigate to: ''(MTA root folder)>server>clientscript.log''
This file logs all '''clientside''' script errors. This is set to log by default, no setup required.
==Debug strategies==
There are several strategies that support finding errors, apart from going through the code. Most of them include outputting debug messages, with have different information depending on the situtation.
===Useful functions===
There are some functions that may come in handy for debugging.
* [[outputDebugString]] or [[outputChatBox]] for outputting any information (use outputDebugString for technical output)
* [http://www.lua.org/manual/5.1/manual.html#pdf-tostring tostring()] on a variable to turn the value into a string. Useful if the value is not a number or string.
* [[getElementType]] to check the type of the MTA element.
* [[isElement]] to check if the MTA element exists.
===Add debugmessages to check ''if'', ''when'' or ''how often'' a section of code is executed===
A typical example would be verify whether an ''if''-section is executed or not. To do that, just add any message you will recognize later within the ''if''-section.
<syntaxhighlight lang="lua">
if (variable1 == variable2) then
    outputDebugString("variable1 is the same as variable2!")
    -- do anything
end
</syntaxhighlight>
Another application would be to check when variable values are modified. First search for all occurences of the variable being edited and add a message just beside it.
===Add debugmessages to check the ''value'' of a variable===
Let's say you want to create a marker, but it doesn't appear at the position you expect it to be. The first thing you might want to do is check if the [[createMarker]] function is executed. But while doing this, you can also check the values being used in the [[createMarker]] function in one run.
<syntaxhighlight lang="lua">
outputChatBox("posX is: "..x.." posY is: "..y.." posZ is: "..z)
createMarker(x,y,z)
</syntaxhighlight>
This would output all three variables that are used as coordinates for the marker. Assuming you read those from a map file, you can now compare the debug output to the desired values. The [http://www.lua.org/manual/5.1/manual.html#pdf-tostring tostring()] will ensure that the values of the variables can be concatenated (put together) as a string, even if it's a boolean value.
==Example==
Imagine you created a [[Colshape|collision shape]] somewhere and you want an action to perform after the player stays for ten seconds inside it, you would do this:
<syntaxhighlight lang="lua">
function colShapeHit(player)
-- set a timer to output a message (could as well execute another function)
-- store the timer id in a table, using the player as index
colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit", root, colShapeHit)
function colShapeLeave(player)
-- kill the timer when the player leaves the colshape
killTimer(colshapeTimer[player])
end
addEventHandler("onColShapeLeave", root, colShapeLeave)
</syntaxhighlight>
When a player enters the colshape, debugscript outputs the following message:
:{{Debug error|..[path]: attempt to index global 'colshapeTimer' (a nil value)}}
This means you tried to index a table that does not exist (because the table is a nil value, it doesn't exist). In the example above, this is done when storing the timer id in the table. We need to add a check if the table exists and if it does not exist we should create it.
<syntaxhighlight lang="lua">
function colShapeHit(player)
if (colshapeTimer == nil) then
colshapeTimer = {}
end
-- set a timer to output a message (could as well execute another function)
-- store the timer id in a table, using the player as index
colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit", root, colShapeHit)
function colShapeLeave(player)
-- kill the timer when the player leaves the colshape
killTimer(colshapeTimer[player])
end
addEventHandler("onColShapeLeave",root,colShapeLeave)
</syntaxhighlight>
Now we will still receive a warning when a player enters the colshape, waits for the message and leaves it again:
:{{Debug warning|[..]: Bad argument @ 'killTimer' Line: ..}}
Except for that (we will talk about that later) everything seems to work fine. A player enters the colshape, the timer is started, if he stays the message occurs, if he leaves the timer is killed.
===A more inconspicuous error===
But for some reason the message gets outputted twice when you stay in the colcircle while in a vehicle. Since it would appear some code is executed twice, we add debug messages to check this.
<syntaxhighlight lang="lua">
function colShapeHit(player)
if (colshapeTimer == nil) then
colshapeTimer = {}
end
-- add a debug message
outputDebugString("colShapeHit")
-- set a timer to output a message (could as well execute another function)
-- store the timer id in a table, using the player as index
colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit",getRootElement(),colShapeHit)
function colShapeLeave(player)
-- add a debug message
outputDebugString("colShapeLeave")
-- kill the timer when the player leaves the colshape
killTimer(colshapeTimer[player])
end
addEventHandler("onColShapeLeave",getRootElement(),colShapeLeave)
</syntaxhighlight>
Now we notice that both handler functions get executed twice when we are in a vehicle, but only once when we are on-foot. It would appear the vehicle triggers the colshape as well. To confirm this theory, we ensure that the ''player'' variable actually holds a reference to a player element.
<syntaxhighlight lang="lua">
function colShapeHit(player)
if (colshapeTimer == nil) then
colshapeTimer = {}
end
-- add a debug message, with the element type
outputDebugString("colShapeHit "..getElementType(player))
-- set a timer to output a message (could as well execute another function)
-- store the timer id in a table, using the player as index
colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit",getRootElement(),colShapeHit)
function colShapeLeave(player)
-- add a debug message, with the element type
outputDebugString("colShapeLeave "..getElementType(player))
-- kill the timer when the player leaves the colshape
killTimer(colshapeTimer[player])
end
addEventHandler("onColShapeLeave",getRootElement(),colShapeLeave)
</syntaxhighlight>
The debug messages tell us that one of the ''player'' variables is a player and that the other one is a vehicle element. Since we only want to react when a player enters the colshape, we add an ''if'' that will end the execution of the function if it's '''not''' an player element.
<syntaxhighlight lang="lua">
function colShapeHit(player)
if (colshapeTimer == nil) then
colshapeTimer = {}
end
-- add a check for the element type
if (getElementType(player) ~= "player") then return end
-- add a debug message, with the element type
outputDebugString("colShapeHit "..getElementType(player))
-- set a timer to output a message (could as well execute another function)
-- store the timer id in a table, using the player as index
colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit",getRootElement(),colShapeHit)
function colShapeLeave(player)
-- add a check for the element type
if (getElementType(player) ~= "player") then return end
-- add a debug message, with the element type
outputDebugString("colShapeLeave "..getElementType(player))
-- kill the timer when the player leaves the colshape
killTimer(colshapeTimer[player])
end
addEventHandler("onColShapeLeave",getRootElement(),colShapeLeave)
</syntaxhighlight>
Now the script should work as desired, but it will still output the warning mentioned above. This happens because the timer we try to kill when a player leaves the colshape will not exist anymore when it has reached the 10 seconds (and therefore executed after the 10th second has completed). There are different ways to get rid of that warning (since you know that the timer might not exist anymore and you only want to kill it if it exists). One way would be to check if the timer referenced in the table really exists. To do this, we need to use [[isTimer]], which we will use when we kill the timer:
<syntaxhighlight lang="lua">
if (isTimer(colshapeTimer[player])) then
killTimer(colshapeTimer[player])
end
</syntaxhighlight>
So the complete working code would be:
<syntaxhighlight lang="lua">
function colShapeHit(player)
if (colshapeTimer == nil) then
colshapeTimer = {}
end
-- add a check for the element type
if (getElementType(player) ~= "player") then return end
-- add a debug message, with the element type
outputDebugString("colShapeHit "..getElementType(player))
-- set a timer to output a message (could as well execute another function)
-- store the timer id in a table, using the player as index
colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit",getRootElement(),colShapeHit)
function colShapeLeave(player)
-- add a check for the element type
if (getElementType(player) ~= "player") then return end
-- add a debug message, with the element type
outputDebugString("colShapeLeave "..getElementType(player))
-- kill the timer when the player leaves the colshape
if (isTimer(colshapeTimer[player])) then
killTimer(colshapeTimer[player])
end
end
addEventHandler("onColShapeLeave",getRootElement(),colShapeLeave)
</syntaxhighlight>
==Debugging Performance Issues==
If your server is using up more resources than it should or you just want to make sure your scripts are efficient, you can find the source of the issue by using a great tool that comes with the default resource package called [[Resource:Performancebrowser|performancebrowser]]. You can start it with ''''start performancebrowser''''. If it doesn't exist then you can get the latest resources from the [https://github.com/multitheftauto/mtasa-resources GitHub repository]. This tool provides an incredible amount of information for performance debugging. Memory leaks, element leaks and CPU intensive scripts are all easily findable via performancebrowser. If you use the ''''d'''' option in Lua timing you can see which functions are using up the CPU.
To access performancebrowser you will need to go to your web browser and enter the address: http://serverIPHere:serverHTTPPortHere/performancebrowser/ Note that the / at the end is required. So for example: http://127.0.0.1:22005/performancebrowser/ You will then need to login with an in-game admin account or any account that has access to ''''resource.performancebrowser.http'''' and ''''resource.ajax.http''''. Most of the information you will need are in the categories Lua timing and Lua memory, look for values that are much higher than other values.
===Examples of scripts that could cause performance problems===
Adding data to a table but never removing it. This would take months/years before it causes a problem though.
<syntaxhighlight lang="lua">
local someData = {}
function storeData()
    someData[source] = true
    -- There is no handling for when a player quits, this is considered a memory leak
    -- Using the Lua timing tab you can detect the RAM usage of each resource.
end
addEventHandler("onPlayerJoin", root, storeData)
</syntaxhighlight>
Element leaking is possible if you use temporary colshapes for whatever reason and may not destroy them. This would cause bandwidth, CPU and memory performance issues over time.
<syntaxhighlight lang="lua">
function useTemporaryCol()
    local col = createColCircle(some code here)
    if (normally this should happen) then
        destroyElement(col)
    end
    -- But sometimes it didn't so the script ended but the collision area remained and over time
    -- you may end up with hundreds to thousands of pointless collision areas.
    -- The Lua timing tab allows you to see the amount of elements each script has created.
end
</syntaxhighlight>
High CPU usage resulting in the server FPS dropping so much that the server is unplayable. In under 24 hours this can create havoc on a very busy server. The amount of "refs" in the Lua timing detect this type of build up, surprisingly the Lua timing tab didn't help in this case but Lua memory did.
<syntaxhighlight lang="lua">
addEventHandler("onPlayerJoin", root, function()
    -- Code for joiner
    addEventHandler("onPlayerQuit", root, function()
        -- Code for when they have quit
        -- See the problem? It's bound to root which the event handler is being added again and again and again
    end)
end)
</syntaxhighlight>
A function uses up a lot of your CPU because whatever it does takes a long time. This is just some function that takes a long time to complete. Without performancebrowser you'd have no idea its the cause but with performancebrowser you can see that a resource is using lots of CPU in the Lua timing tab. If you then enter: ''''d'''' into the options edit box it will even tell you what file name and first line of the function that is using up so much CPU.
<syntaxhighlight lang="lua">
function someDodgyCode()
    for i=1, 100000 do
        -- some code
    end
end
</syntaxhighlight>
[[it:Guida al Debug]]
[[Category:Scripting Concepts]]
[[ru:Debugging]]
[[zh-cn:脚本调试教程]]
[[Category:Tutorials]]

Revision as of 14:22, 15 April 2017

A szkriptekben gyakran előfordulnak kisebb nagyobb problémák, amelyeket nem veszünk észre!Ez a leírás segít abban hogy gyorsan megtaláld őket!

Hibakereső konzol

Az MTA tartalmaz beépített hibakereső konzolt!Hasznos mivel ha elgépelünk valamit és nem vesszük észre ő segítségünkre lehet.Ahhoz hogy tudjuk aktiválni ezt a jogusultságot Adminisztrátor rangot kell viselnünk{ACL}.Ha ez rendben van akkor a "debugscript x" parancsal tudjuk változtatni a visszajelzési szintet!


Lehetőségek:

  • 1: Csak a Hibákat jelzi
  • 2: A hibákat és a Figyelmeztetéseket is jelzi
  • 3: A hibákat és a Figyelmeztetéseket is jelzi illetve az Információkat amelyeket elrejtünk a szkriptekben!

Ha begépeljük a "debugscript 3" parancsot akkor a fent leírt paramétereket fogja megmutatni.Ez a legcélszerűbb funkció, sokkal egyszerűbb vele a fejlesztés

Példa

Ebben a kódban elrejtettünk két darab hibát:

function Koszones(message, player)
    if (getPlayerName(player) == "Józsika")
        outputChatbox("Szia Józsika")
    end
end
addEventHandler("onChatMessage", root, Koszones)

Ha ezt a kódot lefuttatjuk akkor ezt a hibaüzenetet fogjuk kapni:

INFO: Loading script failed: myResource\script.lua:2: 'then' expected near ´outputChatbox'
[Ezt nem fordítom le]

This means the script could not be parsed because there was a syntax error. It shows the script path relative to the resource directory so you can identify to script where the error originated from. After the filename it shows a colon and a number, this number presents the line number - this is so you can find out where in your script the error is - it is very helpful for large scripts. After that is the error message, which varies depending on the error made. Looking at the error message, we can easily determine that the error originated from the resource myResource and line two of the script file script.lua. The error message is very clear, we forgot the "then"! We can easily fix that!

function SayHello(message, player)
    if (getPlayerName(player) == "Fedor") then
        outputChatbox("Hello Fedor")
    end
end
addEventHandler("onChatMessage", root, SayHello)

Now the script will load fine and won't output any errors until a player with the name 'Fedor' says something in the chat. At that moment, the debug console will output:

ERROR: myResource\script.lua:2: attempt to call global 'outputChatbox' (a nil value)

This error means that the function outputChatbox is a nil value, that is - it doesn't exist! This is because the function is actually called outputChatBox, not outputChatbox - take care of that capital B.:

function SayHello(message, player)
    if (getPlayerName(player) == "Fedor") then
        outputChatBox("Hello Fedor")
    end
end
addEventHandler("onChatMessage", root, SayHello)

Of course, this is just an example and I've only skimmed the surface of error messages. There are plenty of other messages and scenarios, but you should get the general idea.

Server & client debug logging

Server

Navigate to: (MTA root folder)>server>mods>deathmatch

There are two nearly identical files:

  • The local.conf is the settings for the "host game" menu item in the main menu of MTA. This is a quick and easy way of starting a temporary server from inside the client. When the client is turned off the server will also turn off.
  • The mtaserver.conf is used when "MTA Server.exe" is executed from (MTA root folder)>server. This runs the server in its own console window which does not need the client to exist or to be run. This is can be useful if you're interested in hosting servers for a longer time period or if you want to experiment with a real world console.

Depending on which way you host, you will want to edit those files. The settings in question are:

<!-- Specifies the location and name of the debugscript log file. If left blank, server won't be saving this file. -->
	<scriptdebuglogfile>logs/scripts.log</scriptdebuglogfile> 
	
	<!-- Specifies the level of the debugscript log file. Available values: 0, 1, 2, 3. When not set, defaults to 0. -->
	<scriptdebugloglevel>0</scriptdebugloglevel>

You want to make sure you have a log name specified. Also you want to specify what level of errors will be logged. If it is 0 nothing will be logged. The levels were explained at the top of this article. If the logging level was changed to 3, then in this case all serverside script errors log to (MTA root folder)>server>mods>deathmatch>logs>scripts.log

Client

Navigate to: (MTA root folder)>server>clientscript.log

This file logs all clientside script errors. This is set to log by default, no setup required.

Debug strategies

There are several strategies that support finding errors, apart from going through the code. Most of them include outputting debug messages, with have different information depending on the situtation.

Useful functions

There are some functions that may come in handy for debugging.

Add debugmessages to check if, when or how often a section of code is executed

A typical example would be verify whether an if-section is executed or not. To do that, just add any message you will recognize later within the if-section.

if (variable1 == variable2) then
    outputDebugString("variable1 is the same as variable2!")
    -- do anything
end

Another application would be to check when variable values are modified. First search for all occurences of the variable being edited and add a message just beside it.

Add debugmessages to check the value of a variable

Let's say you want to create a marker, but it doesn't appear at the position you expect it to be. The first thing you might want to do is check if the createMarker function is executed. But while doing this, you can also check the values being used in the createMarker function in one run.

outputChatBox("posX is: "..x.." posY is: "..y.." posZ is: "..z)
createMarker(x,y,z)

This would output all three variables that are used as coordinates for the marker. Assuming you read those from a map file, you can now compare the debug output to the desired values. The tostring() will ensure that the values of the variables can be concatenated (put together) as a string, even if it's a boolean value.

Example

Imagine you created a collision shape somewhere and you want an action to perform after the player stays for ten seconds inside it, you would do this:

function colShapeHit(player)
	-- set a timer to output a message (could as well execute another function)
	-- store the timer id in a table, using the player as index
	colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit", root, colShapeHit)

function colShapeLeave(player)
	-- kill the timer when the player leaves the colshape
	killTimer(colshapeTimer[player])
end
addEventHandler("onColShapeLeave", root, colShapeLeave)

When a player enters the colshape, debugscript outputs the following message:

ERROR: ..[path]: attempt to index global 'colshapeTimer' (a nil value)

This means you tried to index a table that does not exist (because the table is a nil value, it doesn't exist). In the example above, this is done when storing the timer id in the table. We need to add a check if the table exists and if it does not exist we should create it.

function colShapeHit(player)
	if (colshapeTimer == nil) then
		colshapeTimer = {}
	end
	-- set a timer to output a message (could as well execute another function)
	-- store the timer id in a table, using the player as index
	colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit", root, colShapeHit)

function colShapeLeave(player)
	-- kill the timer when the player leaves the colshape
	killTimer(colshapeTimer[player])
end
addEventHandler("onColShapeLeave",root,colShapeLeave)

Now we will still receive a warning when a player enters the colshape, waits for the message and leaves it again:

WARNING: [..]: Bad argument @ 'killTimer' Line: ..

Except for that (we will talk about that later) everything seems to work fine. A player enters the colshape, the timer is started, if he stays the message occurs, if he leaves the timer is killed.

A more inconspicuous error

But for some reason the message gets outputted twice when you stay in the colcircle while in a vehicle. Since it would appear some code is executed twice, we add debug messages to check this.

function colShapeHit(player)
	if (colshapeTimer == nil) then
		colshapeTimer = {}
	end
	-- add a debug message
	outputDebugString("colShapeHit")
	-- set a timer to output a message (could as well execute another function)
	-- store the timer id in a table, using the player as index
	colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit",getRootElement(),colShapeHit)

function colShapeLeave(player)
	-- add a debug message
	outputDebugString("colShapeLeave")
	-- kill the timer when the player leaves the colshape
	killTimer(colshapeTimer[player])
end
addEventHandler("onColShapeLeave",getRootElement(),colShapeLeave)

Now we notice that both handler functions get executed twice when we are in a vehicle, but only once when we are on-foot. It would appear the vehicle triggers the colshape as well. To confirm this theory, we ensure that the player variable actually holds a reference to a player element.

function colShapeHit(player)
	if (colshapeTimer == nil) then
		colshapeTimer = {}
	end
	-- add a debug message, with the element type
	outputDebugString("colShapeHit "..getElementType(player))
	-- set a timer to output a message (could as well execute another function)
	-- store the timer id in a table, using the player as index
	colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit",getRootElement(),colShapeHit)

function colShapeLeave(player)
	-- add a debug message, with the element type
	outputDebugString("colShapeLeave "..getElementType(player))
	-- kill the timer when the player leaves the colshape
	killTimer(colshapeTimer[player])
end
addEventHandler("onColShapeLeave",getRootElement(),colShapeLeave)

The debug messages tell us that one of the player variables is a player and that the other one is a vehicle element. Since we only want to react when a player enters the colshape, we add an if that will end the execution of the function if it's not an player element.

function colShapeHit(player)
	if (colshapeTimer == nil) then
		colshapeTimer = {}
	end
	-- add a check for the element type
	if (getElementType(player) ~= "player") then return end
	-- add a debug message, with the element type
	outputDebugString("colShapeHit "..getElementType(player))
	-- set a timer to output a message (could as well execute another function)
	-- store the timer id in a table, using the player as index
	colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit",getRootElement(),colShapeHit)

function colShapeLeave(player)
	-- add a check for the element type
	if (getElementType(player) ~= "player") then return end
	-- add a debug message, with the element type
	outputDebugString("colShapeLeave "..getElementType(player))
	-- kill the timer when the player leaves the colshape
	killTimer(colshapeTimer[player])
end
addEventHandler("onColShapeLeave",getRootElement(),colShapeLeave)

Now the script should work as desired, but it will still output the warning mentioned above. This happens because the timer we try to kill when a player leaves the colshape will not exist anymore when it has reached the 10 seconds (and therefore executed after the 10th second has completed). There are different ways to get rid of that warning (since you know that the timer might not exist anymore and you only want to kill it if it exists). One way would be to check if the timer referenced in the table really exists. To do this, we need to use isTimer, which we will use when we kill the timer:

if (isTimer(colshapeTimer[player])) then
	killTimer(colshapeTimer[player])
end

So the complete working code would be:

function colShapeHit(player)
	if (colshapeTimer == nil) then
		colshapeTimer = {}
	end
	-- add a check for the element type
	if (getElementType(player) ~= "player") then return end
	-- add a debug message, with the element type
	outputDebugString("colShapeHit "..getElementType(player))
	-- set a timer to output a message (could as well execute another function)
	-- store the timer id in a table, using the player as index
	colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit",getRootElement(),colShapeHit)

function colShapeLeave(player)
	-- add a check for the element type
	if (getElementType(player) ~= "player") then return end
	-- add a debug message, with the element type
	outputDebugString("colShapeLeave "..getElementType(player))
	-- kill the timer when the player leaves the colshape
	if (isTimer(colshapeTimer[player])) then
		killTimer(colshapeTimer[player])
	end
end
addEventHandler("onColShapeLeave",getRootElement(),colShapeLeave)


Debugging Performance Issues

If your server is using up more resources than it should or you just want to make sure your scripts are efficient, you can find the source of the issue by using a great tool that comes with the default resource package called performancebrowser. You can start it with 'start performancebrowser'. If it doesn't exist then you can get the latest resources from the GitHub repository. This tool provides an incredible amount of information for performance debugging. Memory leaks, element leaks and CPU intensive scripts are all easily findable via performancebrowser. If you use the 'd' option in Lua timing you can see which functions are using up the CPU.

To access performancebrowser you will need to go to your web browser and enter the address: http://serverIPHere:serverHTTPPortHere/performancebrowser/ Note that the / at the end is required. So for example: http://127.0.0.1:22005/performancebrowser/ You will then need to login with an in-game admin account or any account that has access to 'resource.performancebrowser.http' and 'resource.ajax.http'. Most of the information you will need are in the categories Lua timing and Lua memory, look for values that are much higher than other values.

Examples of scripts that could cause performance problems

Adding data to a table but never removing it. This would take months/years before it causes a problem though.

local someData = {}

function storeData()
    someData[source] = true
    -- There is no handling for when a player quits, this is considered a memory leak
    -- Using the Lua timing tab you can detect the RAM usage of each resource.
end
addEventHandler("onPlayerJoin", root, storeData)

Element leaking is possible if you use temporary colshapes for whatever reason and may not destroy them. This would cause bandwidth, CPU and memory performance issues over time.

function useTemporaryCol()
    local col = createColCircle(some code here)
    if (normally this should happen) then
        destroyElement(col)
    end
    -- But sometimes it didn't so the script ended but the collision area remained and over time
    -- you may end up with hundreds to thousands of pointless collision areas. 
    -- The Lua timing tab allows you to see the amount of elements each script has created.
end

High CPU usage resulting in the server FPS dropping so much that the server is unplayable. In under 24 hours this can create havoc on a very busy server. The amount of "refs" in the Lua timing detect this type of build up, surprisingly the Lua timing tab didn't help in this case but Lua memory did.

addEventHandler("onPlayerJoin", root, function()
    -- Code for joiner
    addEventHandler("onPlayerQuit", root, function()
        -- Code for when they have quit
        -- See the problem? It's bound to root which the event handler is being added again and again and again
    end)
end)

A function uses up a lot of your CPU because whatever it does takes a long time. This is just some function that takes a long time to complete. Without performancebrowser you'd have no idea its the cause but with performancebrowser you can see that a resource is using lots of CPU in the Lua timing tab. If you then enter: 'd' into the options edit box it will even tell you what file name and first line of the function that is using up so much CPU.

function someDodgyCode()
    for i=1, 100000 do
        -- some code
    end
end