Hibakeresés: Difference between revisions

From Multi Theft Auto: Wiki
Jump to navigation Jump to search
m (→‎Server: grammar)
(Undo revision 50683 by StrixG (talk))
 
(27 intermediate revisions by 16 users not shown)
Line 1: Line 1:
While scripting you will often come across problems that are not immediately apparent. This page tries to point out some basic strategies to locate the error.
When scripting you will often come across problems that are not immediately apparent. This page tries to point out some basic strategies to locate the error.


==Debug console==
==Debug console==
MTA features a built-in debug console that shows debug messages output from MTA functions or from scripts. You can open it by typing ''debugscript x'' in console, while ''x'' is the debug level:
MTA features a built-in debug console that shows debug messages output from MTA functions or from scripts. Keeping it mind that you should have administrator access (unless you modify the ACL to change this), you can open the debug console by typing ''debugscript *x*'' in the console, where ''x'' is the debug level:
* '''1:''' only errors
* '''1:''' only errors
* '''2:''' errors and warnings
* '''2:''' errors and warnings
* '''3:''' errors, warnings and info messages
* '''3:''' errors, warnings and info messages
Thus, by typing ''debugscript 3'' all messages are visible, that or level 2 are recommended for most occasions. You should have debugscript enabled most of the time you are testing your scripts, this will help you detect typos or other simple issues and solve them easily.
By typing ''debugscript 3'' all messages are visible. Level 3 and level 2 are recommended for most occasions. You should have ''debugscript'' enabled whenever you are testing your scripts as it will help you easily detect and solve typos and other issues.


===Example===
===Example===
This example snippet has two errors:
This example code has two errors:
<syntaxhighlight lang="lua">
<syntaxhighlight lang="lua">
if (getPlayerName(player) == "Fedor")
function SayHello(message, player)
outputChatbox("Hello Fedor")
    if (getPlayerName(player) == "Fedor")
        outputChatbox("Hello Fedor")
    end
end
end
addEventHandler("onChatMessage", root, SayHello)
</syntaxhighlight>
</syntaxhighlight>
When the script this piece of code is in is tried to be loaded, debugscript will output something similiar to this:
When the script this piece of code is in is tried to be loaded, debugscript will output something similiar to this:
{{Debug info|Loading script failed: C:\<server path>\mods\deathmatch\resources\myResource\script.lua:15: 'then' expected near ´outputChatbox'}}
:{{Debug info|Loading script failed: myResource\script.lua:2: 'then' expected near ´outputChatbox'}}
This means the script could not be parsed, because there was a syntax error. It shows the path of the script, so you can also see what resource it is in ('myResource' in this case) and of course the name of the script. After the filename it shows the line number and again after that what was wrong. Easy to solve now, we just forgot the 'then' keyword:
This means the script could not be parsed because there was a syntax error. It shows the script path relative to the resource directory so you can identify to script where the error originated from. After the filename it shows a colon and a number, this number presents the line number - this is so you can find out where in your script the error is - it is very helpful for large scripts. After that is the error message, which varies depending on the error made. Looking at the error message, we can easily determine that the error originated from the resource '''myResource''' and line two of the script file '''script.lua'''. The error message is very clear, we forgot the "then"! We can easily fix that!
<syntaxhighlight lang="lua">
<syntaxhighlight lang="lua">
if (getPlayerName(player) == "Fedor") then
function SayHello(message, player)
outputChatbox("Hello Fedor")
    if (getPlayerName(player) == "Fedor") then
        outputChatbox("Hello Fedor")
    end
end
end
addEventHandler("onChatMessage", root, SayHello)
</syntaxhighlight>
</syntaxhighlight>
Now the script will load fine and won't output any errors, until a player with the name 'Fedor' enters this section of the script. Then, debugscript will output:
Now the script will load fine and won't output any errors until a player with the name 'Fedor' says something in the chat. At that moment, the debug console will output:
{{Debug error|C:\<server path>\mods\deathmatch\resources\d\script.lua:15: attempt to call global 'outputChatbox' (a nil value)}}
:{{Debug error|myResource\script.lua:2: attempt to call global 'outputChatbox' (a nil value)}}
This means the called function does not exist, which can be easily explained since the functions' name is ''outputChatBox'' (with a capital ''B''):
This error means that the function '''outputChatbox''' is a nil value, that is - it doesn't exist! This is because the function is actually called [[outputChatBox]], not [[outputChatbox]] - take care of that capital B.:
<syntaxhighlight lang="lua">
<syntaxhighlight lang="lua">
if (getPlayerName(player) == "Fedor") then
function SayHello(message, player)
outputChatBox("Hello Fedor")
    if (getPlayerName(player) == "Fedor") then
        outputChatBox("Hello Fedor")
    end
end
end
addEventHandler("onChatMessage", root, SayHello)
</syntaxhighlight>
</syntaxhighlight>


This is of course just an example, there are plenty of other messages and scenarios, but you should get the idea.
Of course, this is just an example and I've only skimmed the surface of error messages. There are plenty of other messages and scenarios, but you should get the general idea.


==Server & client debug logging==
==Server & client debug logging==
Line 40: Line 49:
There are two nearly identical files:
There are two nearly identical files:


*The local.conf is the settings for the "host game" shortcut in the main menu of MTA. This is a quick, easy, and temporary way of starting servers from inside the client. When the client is turned off the server will also turn off.
*The local.conf is the settings for the "host game" menu item in the main menu of MTA. This is a quick and easy way of starting a temporary server from inside the client. When the client is turned off the server will also turn off.


*The mtaserver.conf is used when "MTA Server.exe" is executed from (MTA root folder)>server. This runs the server independently of the client for long-term hosting.
*The mtaserver.conf is used when "MTA Server.exe" is executed from (MTA root folder)>server. This runs the server in its own console window which does not need the client to exist or to be run. This is can be useful if you're interested in hosting servers for a longer time period or if you want to experiment with a real world console.


Depending on which way you host, you will want to edit those files. The settings in question are:
Depending on which way you host, you will want to edit those files. The settings in question are:
Line 60: Line 69:


==Debug strategies==
==Debug strategies==
There are several strategies that support finding errors, apart from going through the code of course. Most of them include outputting debug messages, with differing information depending on the situtation.
There are several strategies that support finding errors, apart from going through the code. Most of them include outputting debug messages, with have different information depending on the situtation.


===Useful functions===
===Useful functions===
First of all some functions that may come in handy for debugging.
There are some functions that may come in handy for debugging.
* [[outputDebugString]] or [[outputChatBox]] for outputting any information
* [[outputDebugString]] or [[outputChatBox]] for outputting any information (use outputDebugString for technical output)
* [http://www.lua.org/manual/5.1/manual.html#pdf-tostring tostring()] on a variable to turn it into a string, for example when it contains a boolean value
* [http://www.lua.org/manual/5.1/manual.html#pdf-tostring tostring()] on a variable to turn the value into a string. Useful if the value is not a number or string.
* [[getElementType]] to check an MTA Element for its type
* [[getElementType]] to check the type of the MTA element.
* [[isElement]] to check if the MTA element exists.


===Add debugmessages to check ''if'', ''when'' or ''how often'' a section of code is executed===
===Add debugmessages to check ''if'', ''when'' or ''how often'' a section of code is executed===
Line 72: Line 82:
<syntaxhighlight lang="lua">
<syntaxhighlight lang="lua">
if (variable1 == variable2) then
if (variable1 == variable2) then
outputDebugString("entered if")
    outputDebugString("variable1 is the same as variable2!")
-- do anything
    -- do anything
end
end
</syntaxhighlight>
</syntaxhighlight>
Line 82: Line 92:
Let's say you want to create a marker, but it doesn't appear at the position you expect it to be. The first thing you might want to do is check if the [[createMarker]] function is executed. But while doing this, you can also check the values being used in the [[createMarker]] function in one run.
Let's say you want to create a marker, but it doesn't appear at the position you expect it to be. The first thing you might want to do is check if the [[createMarker]] function is executed. But while doing this, you can also check the values being used in the [[createMarker]] function in one run.
<syntaxhighlight lang="lua">
<syntaxhighlight lang="lua">
outputChatBox(tostring(x).." "..tostring(y).." "..tostring(z))
outputChatBox("posX is: "..x.." posY is: "..y.." posZ is: "..z)
createMarker(x,y,z)
createMarker(x,y,z)
</syntaxhighlight>
</syntaxhighlight>
This would output all three variables that are used as coordinates for the marker. Assuming you read those from a map file, you can now compare the debug output to the desired values. The [http://www.lua.org/manual/5.1/manual.html#pdf-tostring tostring()] will ensure that the variables' value can be put together as a string, even if it's a boolean value for example.
This would output all three variables that are used as coordinates for the marker. Assuming you read those from a map file, you can now compare the debug output to the desired values. The [http://www.lua.org/manual/5.1/manual.html#pdf-tostring tostring()] will ensure that the values of the variables can be concatenated (put together) as a string, even if it's a boolean value.


==Example==
==Example==
Imagine you created a colshape (collision shape) somewhere and you want a player to stay 10 seconds in it, then perform some action.
Imagine you created a [[Colshape|collision shape]] somewhere and you want an action to perform after the player stays for ten seconds inside it, you would do this:
<syntaxhighlight lang="lua">
<syntaxhighlight lang="lua">
function colShapeHit(player)
function colShapeHit(player)
Line 95: Line 105:
colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
end
addEventHandler("onColShapeHit",getRootElement(),colShapeHit)
addEventHandler("onColShapeHit", root, colShapeHit)


function colShapeLeave(player)
function colShapeLeave(player)
Line 101: Line 111:
killTimer(colshapeTimer[player])
killTimer(colshapeTimer[player])
end
end
addEventHandler("onColShapeLeave",getRootElement(),colShapeLeave)
addEventHandler("onColShapeLeave", root, colShapeLeave)
</syntaxhighlight>
</syntaxhighlight>
When a player enters the colshape, debugscript outputs the following message:
When a player enters the colshape, debugscript outputs the following message:
{{Debug error|..[path]: attempt to index global 'colshapeTimer' (a nil value)}}
:{{Debug error|..[path]: attempt to index global 'colshapeTimer' (a nil value)}}
This means you tried to index a table that does not exist. In the example above, this is done when storing the timer id in the table. We need to add a check if the table exists and if not create it.
This means you tried to index a table that does not exist (because the table is a nil value, it doesn't exist). In the example above, this is done when storing the timer id in the table. We need to add a check if the table exists and if it does not exist we should create it.


<syntaxhighlight lang="lua">
<syntaxhighlight lang="lua">
Line 116: Line 126:
colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
end
addEventHandler("onColShapeHit",getRootElement(),colShapeHit)
addEventHandler("onColShapeHit", root, colShapeHit)


function colShapeLeave(player)
function colShapeLeave(player)
Line 122: Line 132:
killTimer(colshapeTimer[player])
killTimer(colshapeTimer[player])
end
end
addEventHandler("onColShapeLeave",getRootElement(),colShapeLeave)
addEventHandler("onColShapeLeave",root,colShapeLeave)
</syntaxhighlight>
</syntaxhighlight>


Now we still get a warning when a player enters the colshape, waits for the message and leaves it again:
Now we will still receive a warning when a player enters the colshape, waits for the message and leaves it again:


{{Debug warning|[..]: Bad argument @ 'killTimer' Line: ..}}
:{{Debug warning|[..]: Bad argument @ 'killTimer' Line: ..}}


Except for that (we will talk about that later) everything seems to work fine. A player enters the colshape, the timer is started, if he stays the message occurs, if he leaves the timer is killed.
Except for that (we will talk about that later) everything seems to work fine. A player enters the colshape, the timer is started, if he stays the message occurs, if he leaves the timer is killed.
Line 156: Line 166:
</syntaxhighlight>
</syntaxhighlight>


Now we notice that both handler functions get executed twice when we are in a vehicle, but only once when we are on-foot. It would appear the vehicle triggers the colshape as well. To confirm this theory, we check the ''player'' variable that '''should''' contain a player element.
Now we notice that both handler functions get executed twice when we are in a vehicle, but only once when we are on-foot. It would appear the vehicle triggers the colshape as well. To confirm this theory, we ensure that the ''player'' variable actually holds a reference to a player element.


<syntaxhighlight lang="lua">
<syntaxhighlight lang="lua">
Line 180: Line 190:
</syntaxhighlight>
</syntaxhighlight>


The debug messages tell us that one of the ''player'' variables is a player, the other one a vehicle element. Since we only want to react when a player enters the colshape, we add an ''if'' that will end the execution of the function if it's '''not''' an player element.
The debug messages tell us that one of the ''player'' variables is a player and that the other one is a vehicle element. Since we only want to react when a player enters the colshape, we add an ''if'' that will end the execution of the function if it's '''not''' an player element.


<syntaxhighlight lang="lua">
<syntaxhighlight lang="lua">
Line 208: Line 218:
</syntaxhighlight>
</syntaxhighlight>


Now the script should work as desired, but will still output the warning mentioned above. This happens because the timer we try to kill when a player leaves the colshape will not exist anymore when it reached the 10 seconds and is executed. There are different ways to get rid of that warning (since you know that the timer might not exist anymore and you only want to kill it if it is there). One way would be to check if the timer referenced in the table really exists. To do this, we need to use [[isTimer]], which we will use when we kill the timer:
Now the script should work as desired, but it will still output the warning mentioned above. This happens because the timer we try to kill when a player leaves the colshape will not exist anymore when it has reached the 10 seconds (and therefore executed after the 10th second has completed). There are different ways to get rid of that warning (since you know that the timer might not exist anymore and you only want to kill it if it exists). One way would be to check if the timer referenced in the table really exists. To do this, we need to use [[isTimer]], which we will use when we kill the timer:
<syntaxhighlight lang="lua">
<syntaxhighlight lang="lua">
if (isTimer(colshapeTimer[player])) then
if (isTimer(colshapeTimer[player])) then
Line 247: Line 257:
==Debugging Performance Issues==
==Debugging Performance Issues==


If your server is using up more resources than it should or you just want to make sure your scripts are efficient you can find the cause using a great tool that comes with MTA SA server, performancebrowser. Make sure that its started with "start performancebrowser" if it doesn't exist then get it from the default resources that come with the server. This tool provides an incredible amount of information for performance debugging. Memory leaks, element leaks and CPU intensive scripts are all easily findable via performancebrowser. If you use -d option in Lua timing you can see which functions are using up the CPU.
If your server is using up more resources than it should or you just want to make sure your scripts are efficient, you can find the source of the issue by using a great tool that comes with the default resource package called [[Resource:Performancebrowser|performancebrowser]]. You can start it with ''''start performancebrowser''''. If it doesn't exist then you can get the latest resources from the [https://github.com/multitheftauto/mtasa-resources GitHub repository]. This tool provides an incredible amount of information for performance debugging. Memory leaks, element leaks and CPU intensive scripts are all easily findable via performancebrowser. If you use the ''''d'''' option in Lua timing you can see which functions are using up the CPU.


To access performancebrowser you will need to go to your web browser and enter the address: http://serverIPHere:serverHTTPPortHere/performancebrowser/ Note that the / at the end is required. So for example: http://127.0.0.1:22005/performancebrowser/ You will then need to login with an in-game admin account or any account that has access to "general.HTTP" Most of the information you will need are in the categories Lua timing and Lua memory, look for values that are much higher than other values.
To access performancebrowser you will need to go to your web browser and enter the address: http://serverIPHere:serverHTTPPortHere/performancebrowser/ Note that the / at the end is required. So for example: http://127.0.0.1:22005/performancebrowser/ You will then need to login with an in-game admin account or any account that has access to ''''resource.performancebrowser.http'''' and ''''resource.ajax.http''''. Most of the information you will need are in the categories Lua timing and Lua memory, look for values that are much higher than other values.


===Examples of scripts that could cause performance problems===
===Examples of scripts that could cause performance problems===
Line 289: Line 299:
</syntaxhighlight>
</syntaxhighlight>


A function uses up a lot of your CPU because whatever it does takes a long time. This is just some function that takes a long time to complete. Without performancebrowser you'd have no idea its the cause but with performancebrowser you can see that a resource is using lots of CPU in the Lua timing tab. If you then enter: -d into the options edit box it will even tell you what file name and first line of the function that is using up so much CPU.
A function uses up a lot of your CPU because whatever it does takes a long time. This is just some function that takes a long time to complete. Without performancebrowser you'd have no idea its the cause but with performancebrowser you can see that a resource is using lots of CPU in the Lua timing tab. If you then enter: ''''d'''' into the options edit box it will even tell you what file name and first line of the function that is using up so much CPU.
<syntaxhighlight lang="lua">
<syntaxhighlight lang="lua">
function someDodgyCode()
function someDodgyCode()
Line 301: Line 311:
[[Category:Scripting Concepts]]
[[Category:Scripting Concepts]]
[[ru:Debugging]]
[[ru:Debugging]]
[[zh-cn:脚本调试教程]]
[[Category:Tutorials]]

Latest revision as of 16:40, 15 April 2017

When scripting you will often come across problems that are not immediately apparent. This page tries to point out some basic strategies to locate the error.

Debug console

MTA features a built-in debug console that shows debug messages output from MTA functions or from scripts. Keeping it mind that you should have administrator access (unless you modify the ACL to change this), you can open the debug console by typing debugscript *x* in the console, where x is the debug level:

  • 1: only errors
  • 2: errors and warnings
  • 3: errors, warnings and info messages

By typing debugscript 3 all messages are visible. Level 3 and level 2 are recommended for most occasions. You should have debugscript enabled whenever you are testing your scripts as it will help you easily detect and solve typos and other issues.

Example

This example code has two errors:

function SayHello(message, player)
    if (getPlayerName(player) == "Fedor")
        outputChatbox("Hello Fedor")
    end
end
addEventHandler("onChatMessage", root, SayHello)

When the script this piece of code is in is tried to be loaded, debugscript will output something similiar to this:

INFO: Loading script failed: myResource\script.lua:2: 'then' expected near ´outputChatbox'

This means the script could not be parsed because there was a syntax error. It shows the script path relative to the resource directory so you can identify to script where the error originated from. After the filename it shows a colon and a number, this number presents the line number - this is so you can find out where in your script the error is - it is very helpful for large scripts. After that is the error message, which varies depending on the error made. Looking at the error message, we can easily determine that the error originated from the resource myResource and line two of the script file script.lua. The error message is very clear, we forgot the "then"! We can easily fix that!

function SayHello(message, player)
    if (getPlayerName(player) == "Fedor") then
        outputChatbox("Hello Fedor")
    end
end
addEventHandler("onChatMessage", root, SayHello)

Now the script will load fine and won't output any errors until a player with the name 'Fedor' says something in the chat. At that moment, the debug console will output:

ERROR: myResource\script.lua:2: attempt to call global 'outputChatbox' (a nil value)

This error means that the function outputChatbox is a nil value, that is - it doesn't exist! This is because the function is actually called outputChatBox, not outputChatbox - take care of that capital B.:

function SayHello(message, player)
    if (getPlayerName(player) == "Fedor") then
        outputChatBox("Hello Fedor")
    end
end
addEventHandler("onChatMessage", root, SayHello)

Of course, this is just an example and I've only skimmed the surface of error messages. There are plenty of other messages and scenarios, but you should get the general idea.

Server & client debug logging

Server

Navigate to: (MTA root folder)>server>mods>deathmatch

There are two nearly identical files:

  • The local.conf is the settings for the "host game" menu item in the main menu of MTA. This is a quick and easy way of starting a temporary server from inside the client. When the client is turned off the server will also turn off.
  • The mtaserver.conf is used when "MTA Server.exe" is executed from (MTA root folder)>server. This runs the server in its own console window which does not need the client to exist or to be run. This is can be useful if you're interested in hosting servers for a longer time period or if you want to experiment with a real world console.

Depending on which way you host, you will want to edit those files. The settings in question are:

<!-- Specifies the location and name of the debugscript log file. If left blank, server won't be saving this file. -->
	<scriptdebuglogfile>logs/scripts.log</scriptdebuglogfile> 
	
	<!-- Specifies the level of the debugscript log file. Available values: 0, 1, 2, 3. When not set, defaults to 0. -->
	<scriptdebugloglevel>0</scriptdebugloglevel>

You want to make sure you have a log name specified. Also you want to specify what level of errors will be logged. If it is 0 nothing will be logged. The levels were explained at the top of this article. If the logging level was changed to 3, then in this case all serverside script errors log to (MTA root folder)>server>mods>deathmatch>logs>scripts.log

Client

Navigate to: (MTA root folder)>server>clientscript.log

This file logs all clientside script errors. This is set to log by default, no setup required.

Debug strategies

There are several strategies that support finding errors, apart from going through the code. Most of them include outputting debug messages, with have different information depending on the situtation.

Useful functions

There are some functions that may come in handy for debugging.

Add debugmessages to check if, when or how often a section of code is executed

A typical example would be verify whether an if-section is executed or not. To do that, just add any message you will recognize later within the if-section.

if (variable1 == variable2) then
    outputDebugString("variable1 is the same as variable2!")
    -- do anything
end

Another application would be to check when variable values are modified. First search for all occurences of the variable being edited and add a message just beside it.

Add debugmessages to check the value of a variable

Let's say you want to create a marker, but it doesn't appear at the position you expect it to be. The first thing you might want to do is check if the createMarker function is executed. But while doing this, you can also check the values being used in the createMarker function in one run.

outputChatBox("posX is: "..x.." posY is: "..y.." posZ is: "..z)
createMarker(x,y,z)

This would output all three variables that are used as coordinates for the marker. Assuming you read those from a map file, you can now compare the debug output to the desired values. The tostring() will ensure that the values of the variables can be concatenated (put together) as a string, even if it's a boolean value.

Example

Imagine you created a collision shape somewhere and you want an action to perform after the player stays for ten seconds inside it, you would do this:

function colShapeHit(player)
	-- set a timer to output a message (could as well execute another function)
	-- store the timer id in a table, using the player as index
	colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit", root, colShapeHit)

function colShapeLeave(player)
	-- kill the timer when the player leaves the colshape
	killTimer(colshapeTimer[player])
end
addEventHandler("onColShapeLeave", root, colShapeLeave)

When a player enters the colshape, debugscript outputs the following message:

ERROR: ..[path]: attempt to index global 'colshapeTimer' (a nil value)

This means you tried to index a table that does not exist (because the table is a nil value, it doesn't exist). In the example above, this is done when storing the timer id in the table. We need to add a check if the table exists and if it does not exist we should create it.

function colShapeHit(player)
	if (colshapeTimer == nil) then
		colshapeTimer = {}
	end
	-- set a timer to output a message (could as well execute another function)
	-- store the timer id in a table, using the player as index
	colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit", root, colShapeHit)

function colShapeLeave(player)
	-- kill the timer when the player leaves the colshape
	killTimer(colshapeTimer[player])
end
addEventHandler("onColShapeLeave",root,colShapeLeave)

Now we will still receive a warning when a player enters the colshape, waits for the message and leaves it again:

WARNING: [..]: Bad argument @ 'killTimer' Line: ..

Except for that (we will talk about that later) everything seems to work fine. A player enters the colshape, the timer is started, if he stays the message occurs, if he leaves the timer is killed.

A more inconspicuous error

But for some reason the message gets outputted twice when you stay in the colcircle while in a vehicle. Since it would appear some code is executed twice, we add debug messages to check this.

function colShapeHit(player)
	if (colshapeTimer == nil) then
		colshapeTimer = {}
	end
	-- add a debug message
	outputDebugString("colShapeHit")
	-- set a timer to output a message (could as well execute another function)
	-- store the timer id in a table, using the player as index
	colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit",getRootElement(),colShapeHit)

function colShapeLeave(player)
	-- add a debug message
	outputDebugString("colShapeLeave")
	-- kill the timer when the player leaves the colshape
	killTimer(colshapeTimer[player])
end
addEventHandler("onColShapeLeave",getRootElement(),colShapeLeave)

Now we notice that both handler functions get executed twice when we are in a vehicle, but only once when we are on-foot. It would appear the vehicle triggers the colshape as well. To confirm this theory, we ensure that the player variable actually holds a reference to a player element.

function colShapeHit(player)
	if (colshapeTimer == nil) then
		colshapeTimer = {}
	end
	-- add a debug message, with the element type
	outputDebugString("colShapeHit "..getElementType(player))
	-- set a timer to output a message (could as well execute another function)
	-- store the timer id in a table, using the player as index
	colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit",getRootElement(),colShapeHit)

function colShapeLeave(player)
	-- add a debug message, with the element type
	outputDebugString("colShapeLeave "..getElementType(player))
	-- kill the timer when the player leaves the colshape
	killTimer(colshapeTimer[player])
end
addEventHandler("onColShapeLeave",getRootElement(),colShapeLeave)

The debug messages tell us that one of the player variables is a player and that the other one is a vehicle element. Since we only want to react when a player enters the colshape, we add an if that will end the execution of the function if it's not an player element.

function colShapeHit(player)
	if (colshapeTimer == nil) then
		colshapeTimer = {}
	end
	-- add a check for the element type
	if (getElementType(player) ~= "player") then return end
	-- add a debug message, with the element type
	outputDebugString("colShapeHit "..getElementType(player))
	-- set a timer to output a message (could as well execute another function)
	-- store the timer id in a table, using the player as index
	colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit",getRootElement(),colShapeHit)

function colShapeLeave(player)
	-- add a check for the element type
	if (getElementType(player) ~= "player") then return end
	-- add a debug message, with the element type
	outputDebugString("colShapeLeave "..getElementType(player))
	-- kill the timer when the player leaves the colshape
	killTimer(colshapeTimer[player])
end
addEventHandler("onColShapeLeave",getRootElement(),colShapeLeave)

Now the script should work as desired, but it will still output the warning mentioned above. This happens because the timer we try to kill when a player leaves the colshape will not exist anymore when it has reached the 10 seconds (and therefore executed after the 10th second has completed). There are different ways to get rid of that warning (since you know that the timer might not exist anymore and you only want to kill it if it exists). One way would be to check if the timer referenced in the table really exists. To do this, we need to use isTimer, which we will use when we kill the timer:

if (isTimer(colshapeTimer[player])) then
	killTimer(colshapeTimer[player])
end

So the complete working code would be:

function colShapeHit(player)
	if (colshapeTimer == nil) then
		colshapeTimer = {}
	end
	-- add a check for the element type
	if (getElementType(player) ~= "player") then return end
	-- add a debug message, with the element type
	outputDebugString("colShapeHit "..getElementType(player))
	-- set a timer to output a message (could as well execute another function)
	-- store the timer id in a table, using the player as index
	colshapeTimer[player] = setTimer(outputChatBox,10000,1,"The player stayed 10 seconds in the colshape!")
end
addEventHandler("onColShapeHit",getRootElement(),colShapeHit)

function colShapeLeave(player)
	-- add a check for the element type
	if (getElementType(player) ~= "player") then return end
	-- add a debug message, with the element type
	outputDebugString("colShapeLeave "..getElementType(player))
	-- kill the timer when the player leaves the colshape
	if (isTimer(colshapeTimer[player])) then
		killTimer(colshapeTimer[player])
	end
end
addEventHandler("onColShapeLeave",getRootElement(),colShapeLeave)


Debugging Performance Issues

If your server is using up more resources than it should or you just want to make sure your scripts are efficient, you can find the source of the issue by using a great tool that comes with the default resource package called performancebrowser. You can start it with 'start performancebrowser'. If it doesn't exist then you can get the latest resources from the GitHub repository. This tool provides an incredible amount of information for performance debugging. Memory leaks, element leaks and CPU intensive scripts are all easily findable via performancebrowser. If you use the 'd' option in Lua timing you can see which functions are using up the CPU.

To access performancebrowser you will need to go to your web browser and enter the address: http://serverIPHere:serverHTTPPortHere/performancebrowser/ Note that the / at the end is required. So for example: http://127.0.0.1:22005/performancebrowser/ You will then need to login with an in-game admin account or any account that has access to 'resource.performancebrowser.http' and 'resource.ajax.http'. Most of the information you will need are in the categories Lua timing and Lua memory, look for values that are much higher than other values.

Examples of scripts that could cause performance problems

Adding data to a table but never removing it. This would take months/years before it causes a problem though.

local someData = {}

function storeData()
    someData[source] = true
    -- There is no handling for when a player quits, this is considered a memory leak
    -- Using the Lua timing tab you can detect the RAM usage of each resource.
end
addEventHandler("onPlayerJoin", root, storeData)

Element leaking is possible if you use temporary colshapes for whatever reason and may not destroy them. This would cause bandwidth, CPU and memory performance issues over time.

function useTemporaryCol()
    local col = createColCircle(some code here)
    if (normally this should happen) then
        destroyElement(col)
    end
    -- But sometimes it didn't so the script ended but the collision area remained and over time
    -- you may end up with hundreds to thousands of pointless collision areas. 
    -- The Lua timing tab allows you to see the amount of elements each script has created.
end

High CPU usage resulting in the server FPS dropping so much that the server is unplayable. In under 24 hours this can create havoc on a very busy server. The amount of "refs" in the Lua timing detect this type of build up, surprisingly the Lua timing tab didn't help in this case but Lua memory did.

addEventHandler("onPlayerJoin", root, function()
    -- Code for joiner
    addEventHandler("onPlayerQuit", root, function()
        -- Code for when they have quit
        -- See the problem? It's bound to root which the event handler is being added again and again and again
    end)
end)

A function uses up a lot of your CPU because whatever it does takes a long time. This is just some function that takes a long time to complete. Without performancebrowser you'd have no idea its the cause but with performancebrowser you can see that a resource is using lots of CPU in the Lua timing tab. If you then enter: 'd' into the options edit box it will even tell you what file name and first line of the function that is using up so much CPU.

function someDodgyCode()
    for i=1, 100000 do
        -- some code
    end
end