Template:Sound Effects Parameters
Jump to navigation
Jump to search
| Chorus | ||||
|---|---|---|---|---|
| http://www.un4seen.com/doc/#bass/BASS_DX8_CHORUS.html | ||||
| Parameter | Type | Default value | Valid range | Description |
| wetDryMix | float | 50 | 0-100 | Ratio of wet (processed) signal to dry (unprocessed) signal. |
| depth | float | 10 | 0-100 | Percentage by which the delay time is modulated by the low-frequency oscillator (LFO). |
| feedback | float | 25 | -99-99 | Percentage of output signal to feed back into the effect's input. |
| frequency | float | 1.1 | 0-10 | Frequency of the LFO. |
| waveform | int | 1 | 0-1 | Waveform of the LFO... 0 = triangle, 1 = sine. |
| delay | float | 16 | 0-20 (ms) | Number of milliseconds the input is delayed before it is played back. |
| phase | int | 1 | 0-4 | Phase differential between left and right LFOs.
|
| Compressor | ||||
|---|---|---|---|---|
| http://www.un4seen.com/doc/#bass/BASS_DX8_COMPRESSOR.html | ||||
| Parameter | Type | Default value | Valid range | Description |
| gain | float | 0 | -60-60 (dB) | Output gain of signal after compression. |
| attack | float | 10 | 0.01-500 (ms) | Time before compression reaches its full value. |
| release | float | 200 | 50-3000 (ms) | Speed at which compression is stopped after input drops below threshold. |
| threshold | float | -20 | -60-0 (dB) | Point at which compression begins. |
| ratio | float | 3 | 1-100 | Compression ratio. |
| predelay | int | 4 (ms) | 0-4 | Time after threshold is reached before attack phase is started. |
| Distortion | ||||
|---|---|---|---|---|
| http://www.un4seen.com/doc/#bass/BASS_DX8_DISTORTION.html | ||||
| Parameter | Type | Default value | Valid range | Description |
| gain | float | -18 | -60-0 (dB) | Amount of signal change after distortion. |
| edge | float | 15 | 0-100 | Percentage of distortion intensity. |
| postEQCenterFrequency | float | 2400 | 100-8000 (Hz) | Center frequency of harmonic content addition. |
| postEQBandwidth | float | 2400 | 100-8000 (Hz) | Width of frequency band that determines range of harmonic content addition. |
| preLowpassCutoff | float | 8000 | 100-8000 (Hz) | Filter cutoff for high-frequency harmonics attenuation. |
| Echo | ||||
|---|---|---|---|---|
| http://www.un4seen.com/doc/#bass/BASS_DX8_ECHO.html | ||||
| Parameter | Type | Default value | Valid range | Description |
| wetDryMix | float | 50 | 0-100 | Ratio of wet (processed) signal to dry (unprocessed) signal. |
| feedback | float | 50 | 0-100 | Percentage of output fed back into input. |
| leftDelay | float | 500 | 1-2000 (ms) | Delay for left channel. |
| rightDelay | float | 500 | 1-2000 (ms) | Delay for right channel. |
| panDelay | bool | false | false, true | Value that specifies whether to swap left and right delays with each successive echo. |
| Flanger | ||||
|---|---|---|---|---|
| http://www.un4seen.com/doc/#bass/BASS_DX8_FLANGER.html | ||||
| Parameter | Type | Default value | Valid range | Description |
| wetDryMix | float | 50 | 0-100 | Ratio of wet (processed) signal to dry (unprocessed) signal. |
| depth | float | 100 | 0-100 | Percentage by which the delay time is modulated by the low-frequency oscillator (LFO). |
| feedback | float | -50 | -99-99 | Percentage of output signal to feed back into the effect's input. |
| frequency | float | 0.25 | 0-10 | Frequency of the LFO. |
| waveform | int | 1 | 0-1 | Waveform of the LFO... 0 = triangle, 1 = sine. |
| delay | float | 2 | 0-4 (ms) | Number of milliseconds the input is delayed before it is played back. |
| phase | int | 2 | 0-4 | Phase differential between left and right LFOs.
|
| Gargle | ||||
|---|---|---|---|---|
| http://www.un4seen.com/doc/#bass/BASS_DX8_GARGLE.html | ||||
| Parameter | Type | Default value | Valid range | Description |
| rateHz | int | 20 | 1-1000 (Hz) | Rate of modulation. |
| waveShape | int | 0 | 0-1 | Shape of the modulation waveform... 0 = triangle, 1 = square. |
| I3DL2 Reverb | ||||
|---|---|---|---|---|
| http://www.un4seen.com/doc/#bass/BASS_DX8_I3DL2REVERB.html | ||||
| Parameter | Type | Default value | Valid range | Description |
| room | int | -1000 | -10000-0 (mB) | Attenuation of the room effect. |
| roomHF | int | -100 | -10000-0 (mB) | Attenuation of the room high-frequency effect. |
| roomRolloffFactor | float | 0 | 0-10 | Rolloff factor for the reflected signals. |
| decayTime | float | 1.49 | 0.1-20 (s) | Decay time. |
| decayHFRatio | int | 0.83 | 0.1-2 | Ratio of the decay time at high frequencies to the decay time at low frequencies. |
| reflections | int | -2602 | -10000-1000 (mB) | Attenuation of early reflections relative to room. |
| reflectionsDelay | float | 0.007 | 0-0.3 (s) | Delay time of the first reflection relative to the direct path. |
| reverb | int | 200 | -10000-2000 (mB) | Attenuation of late reverberation relative to room. |
| reverbDelay | float | 0.011 | 0-0.1 (s) | Time limit between the early reflections and the late reverberation relative to the time of the first reflection. |
| diffusion | float | 100 | 0-100 | Echo density in the late reverberation decay. |
| density | float | 100 | 0-100 | Modal density in the late reverberation decay. |
| HFReference | float | 5000 | 20-20000 (Hz) | Delay time of the first reflection relative to the direct path. |
| Parametric Equalizer | ||||
|---|---|---|---|---|
| http://www.un4seen.com/doc/#bass/BASS_DX8_PARAMEQ.html | ||||
| Parameter | Type | Default value | Valid range | Description |
| center | float | 0 | 80-16000 (Hz) | Center frequency. |
| bandwidth | float | 12 | 1-36 | Bandwidth, in semitones. |
| gain | float | 0 | -15-15 (dB) | Output gain of signal. |
| Reverb | ||||
|---|---|---|---|---|
| http://www.un4seen.com/doc/#bass/BASS_DX8_REVERB.html | ||||
| Parameter | Type | Default value | Valid range | Description |
| inGain | float | 0 | -96-0 (dB) | Input gain of signal. |
| reverbMix | float | 0 | -96-0 (dB) | Reverb mix. |
| reverbTime | float | 1000 | 0.001-3000 (ms) | Reverb time. |
| highFreqRTRatio | float | 0.001 | 0.001-0.999 (ms) | High-frequency reverb time ratio. |