Ta funkcja pobiera parametry dźwięku.
Składnia
table getSoundEffectParameters ( element dzwiek, string nazwaEfektu )
Składnia OOP Pomocy, nie rozumiem!
- Metoda: dźwięk:getEffectParameters(...)
Wymagane Argumenty
- dzwiek: Element dźwięku, którego chcesz pobrać parametry
- nazwaEfektu: Nazwa efektu, którego parametry chcesz pobrać:
Template:PL/Sound Effects
Zwraca
Zwraca parametry danego efektu lub fałsz jeżeli dźwięk jest nieprawidłowy.
Parametry efektów
| Chorus
|
| http://www.un4seen.com/doc/#bass/BASS_DX8_CHORUS.html
|
| Parameter |
Type |
Default value |
Valid range |
Description
|
| wetDryMix |
float |
50 |
0-100
|
Ratio of wet (processed) signal to dry (unprocessed) signal.
|
| depth |
float |
10 |
0-100
|
Percentage by which the delay time is modulated by the low-frequency oscillator (LFO).
|
| feedback |
float |
25 |
-99-99
|
Percentage of output signal to feed back into the effect's input.
|
| frequency |
float |
1.1 |
0-10
|
Frequency of the LFO.
|
| waveform |
int |
1 |
0-1
|
Waveform of the LFO... 0 = triangle, 1 = sine.
|
| delay |
float |
16 |
0-20 (ms)
|
Number of milliseconds the input is delayed before it is played back.
|
| phase |
int |
1 |
0-4
|
Phase differential between left and right LFOs.
- 0: -180
- 1: -90
- 2: 0
- 3: 90
- 4: 180
|
| Compressor
|
| http://www.un4seen.com/doc/#bass/BASS_DX8_COMPRESSOR.html
|
| Parameter |
Type |
Default value |
Valid range |
Description
|
| gain |
float |
0 |
-60-60 (dB)
|
Output gain of signal after compression.
|
| attack |
float |
10
|
0.01-500 (ms)
|
Time before compression reaches its full value.
|
| release |
float |
200 |
50-3000 (ms)
|
Speed at which compression is stopped after input drops below threshold.
|
| threshold |
float |
-20 |
-60-0 (dB)
|
Point at which compression begins.
|
| ratio |
float |
3 |
1-100
|
Compression ratio.
|
| predelay |
int |
4 (ms) |
0-4
|
Time after threshold is reached before attack phase is started.
|
| Distortion
|
| http://www.un4seen.com/doc/#bass/BASS_DX8_DISTORTION.html
|
| Parameter |
Type |
Default value |
Valid range |
Description
|
| gain |
float |
-18 |
-60-0 (dB)
|
Amount of signal change after distortion.
|
| edge |
float |
15 |
0-100
|
Percentage of distortion intensity.
|
| postEQCenterFrequency |
float |
2400
|
100-8000 (Hz)
|
Center frequency of harmonic content addition.
|
| postEQBandwidth |
float |
2400 |
100-8000 (Hz)
|
Width of frequency band that determines range of harmonic content addition.
|
| preLowpassCutoff |
float |
8000 |
100-8000 (Hz)
|
Filter cutoff for high-frequency harmonics attenuation.
|
| Echo
|
| http://www.un4seen.com/doc/#bass/BASS_DX8_ECHO.html
|
| Parameter |
Type |
Default value |
Valid range |
Description
|
| wetDryMix |
float |
50 |
0-100
|
Ratio of wet (processed) signal to dry (unprocessed) signal.
|
| feedback |
float |
50 |
0-100
|
Percentage of output fed back into input.
|
| leftDelay |
float |
500
|
1-2000 (ms)
|
Delay for left channel.
|
| rightDelay |
float |
500 |
1-2000 (ms)
|
Delay for right channel.
|
| panDelay |
bool |
false |
false, true
|
Value that specifies whether to swap left and right delays with each successive echo.
|
| Flanger
|
| http://www.un4seen.com/doc/#bass/BASS_DX8_FLANGER.html
|
| Parameter |
Type |
Default value |
Valid range |
Description
|
| wetDryMix |
float |
50 |
0-100
|
Ratio of wet (processed) signal to dry (unprocessed) signal.
|
| depth |
float |
100 |
0-100
|
Percentage by which the delay time is modulated by the low-frequency oscillator (LFO).
|
| feedback |
float |
-50 |
-99-99
|
Percentage of output signal to feed back into the effect's input.
|
| frequency |
float |
0.25 |
0-10
|
Frequency of the LFO.
|
| waveform |
int |
1 |
0-1
|
Waveform of the LFO... 0 = triangle, 1 = sine.
|
| delay |
float |
2 |
0-4 (ms)
|
Number of milliseconds the input is delayed before it is played back.
|
| phase |
int |
2 |
0-4
|
Phase differential between left and right LFOs.
- 0: -180
- 1: -90
- 2: 0
- 3: 90
- 4: 180
|
| I3DL2 Reverb
|
| http://www.un4seen.com/doc/#bass/BASS_DX8_I3DL2REVERB.html
|
| Parameter |
Type |
Default value |
Valid range |
Description
|
| room |
int |
-1000 |
-10000-0 (mB)
|
Attenuation of the room effect.
|
| roomHF |
int |
-100 |
-10000-0 (mB)
|
Attenuation of the room high-frequency effect.
|
| roomRolloffFactor |
float |
0 |
0-10
|
Rolloff factor for the reflected signals.
|
| decayTime |
float |
1.49 |
0.1-20 (s)
|
Decay time.
|
| decayHFRatio |
int |
0.83 |
0.1-2
|
Ratio of the decay time at high frequencies to the decay time at low frequencies.
|
| reflections |
int |
-2602 |
-10000-1000 (mB)
|
Attenuation of early reflections relative to room.
|
| reflectionsDelay |
float |
0.007 |
0-0.3 (s)
|
Delay time of the first reflection relative to the direct path.
|
| reverb |
int |
200
|
-10000-2000 (mB)
|
Attenuation of late reverberation relative to room.
|
| reverbDelay |
float |
0.011 |
0-0.1 (s)
|
Time limit between the early reflections and the late reverberation relative to the time of the first reflection.
|
| diffusion |
float |
100 |
0-100
|
Echo density in the late reverberation decay.
|
| density |
float |
100 |
0-100
|
Modal density in the late reverberation decay.
|
| HFReference |
float |
5000 |
20-20000 (Hz)
|
Delay time of the first reflection relative to the direct path.
|
| Parametric Equalizer
|
| http://www.un4seen.com/doc/#bass/BASS_DX8_PARAMEQ.html
|
| Parameter |
Type |
Default value |
Valid range |
Description
|
| center |
float |
0 |
80-16000 (Hz)
|
Center frequency.
|
| bandwidth |
float |
12
|
1-36
|
Bandwidth, in semitones.
|
| gain |
float |
0 |
-15-15 (dB)
|
Output gain of signal.
|
| Reverb
|
| http://www.un4seen.com/doc/#bass/BASS_DX8_REVERB.html
|
| Parameter |
Type |
Default value |
Valid range |
Description
|
| inGain |
float |
0 |
-96-0 (dB)
|
Input gain of signal.
|
| reverbMix |
float |
0
|
-96-0 (dB)
|
Reverb mix.
|
| reverbTime |
float |
1000 |
0.001-3000 (ms)
|
Reverb time.
|
| highFreqRTRatio |
float |
0.001 |
0.001-0.999 (ms)
|
High-frequency reverb time ratio.
|
Przykłady
local sound = playSound("music.mp3")
setSoundEffectEnabled(sound, "echo", true)
local echoParams = getSoundEffectParameters(sound, "echo")
iprint(echoParams)
--[[
{
feedback = 50,
leftDelay = 500,
panDelay = false,
rightDelay = 500,
wetDryMix = 50
}
]]
Wymagania
| Minimalna wersja serwera
|
n/a
|
| Minimalna wersja klienta
|
1.5.8-9.20914
|
Uwaga: Użycie tej funkcji wymaga zasobu posiadającego zadeklarowaną minimalną wersję w meta.xml w sekcji <min_mta_version>. Przykład: <min_mta_version client="1.5.8-9.20914" />
See Also