Script güvenliği-TEST

From Multi Theft Auto: Wiki
Revision as of 14:23, 15 December 2024 by Shady (talk | contribs) (Created page with "==Müşteri hafızasının farkındalığı== En temelden başlayarak: * Herhangi bir verinin istemci tarafında (client-side) saklanmasının risk altında olduğunu bilmelisiniz; buna .lua dosyaları da dahildir. İstemci tarafında (oyuncunun bilgisayarında) saklanan veya bu taraf üzerinden iletilen gizli ve/veya önemli veriler, kötü niyetli istemciler tarafından erişilebilir. * Hassas verileri ve/veya Lua mantığını güvende tutmak için sunucu tarafını...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Müşteri hafızasının farkındalığı

En temelden başlayarak:

  • Herhangi bir verinin istemci tarafında (client-side) saklanmasının risk altında olduğunu bilmelisiniz; buna .lua dosyaları da dahildir. İstemci tarafında (oyuncunun bilgisayarında) saklanan veya bu taraf üzerinden iletilen gizli ve/veya önemli veriler, kötü niyetli istemciler tarafından erişilebilir.
  • Hassas verileri ve/veya Lua mantığını güvende tutmak için sunucu tarafını (server-side) kullanın.Shared olarak işaretlenmiş betiklerin aynı zamanda client kodu olarak çalıştığını unutmayın; bu da yukarıdaki her şeyin bunlar için de geçerli olduğu anlamına gelir. Örneğin, aşağıdaki gibi bir tanım yapmak:
<script src="script.lua" type="shared"/> <!-- bu komut dosyası hem client hem de sunucu üzerinde ayrı ayrı çalışacaktır -->

Yani bunu yapmakla aynı şey:

<script src="script.lua" type="client"/> <!-- istemcide ayrı olarak tanımlayın -->
<script src="script.lua" type="server"/> <!-- aynısını yapın, ancak sunucuda -->

Ek koruma katmanı

Sunucunuza kötü niyetle yaklaşanlara işleri biraz daha zorlaştırmak için, meta.xml içinde kullanılabilir olan önbellek (cache) özelliğinden ve/veya Lua derleme (Luac olarak da bilinir) ile birlikte ek gizlilik seviyesini 3 olarak ayarlayarak API kullanabilirsiniz. Ayrıca, MTA'nın dahili AC'sini yapılandırarak SD (Özel Algılamalar) özelliğini etkinleştirmeyi düşünün. Detaylar için: Anti-hile rehberi.

<script src="shared.lua" type="shared" cache="false"/> <!-- cache="false", cache false yaparak Lua dosyasının oyuncunun bilgisayarına kaydedilmeyeceğini belirtir,her zaman önerilen ayarlama bu'dur -->
<script src="client.lua" type="client" cache="false"/> <!-- cache="false", ve bu'da aynı şekilde Lua dosyasının oyuncunun bilgisayarında kaydedilmeyeceğini gösterir,her zaman önerilen ayarlama bu'dur -->
  • Biraz daha zorlaştırır ama imkansız değildir; yine de olası mantık hatalarını veya eksik/yanlış güvenlik kontrollerini arayan kişilerin .lua dosyalarınızı incelemesini önlemede çoğu kişi için etkili olur.
  • Hem client hem de shared script türlerinde kullanılabilir (sunucu taraflı Lua üzerinde etkisi yoktur).
  • Daha önce indirilen Lua dosyalarını kaldırmaz.

Arka kapıları ve hileleri tespit etme ve bunlarla başa çıkma

Lua betiklerinden kaynaklanabilecek minimum (veya sıfır) zararı garanti altına almak için:

  • Sunucunuzu güncel tutun, en son sunucu sürümlerini MTA:SA nightly sitesinden indirebilirsiniz. Spesifik sürümler hakkında bilgilere ise buradan ulaşabilirsiniz.
  • Sistem kaynaklarınızı güncel tutun, en son (varsayılan) kaynakları GitHub deposundan indirebilirsiniz. Bu kaynaklar genellikle en son güvenlik yamalarını içerir; bu da sunucunuzun saldırılara karşı dayanıklı olup olmadığını belirleyebilir.
  • ACL (Erişim Kontrol Listesi)'ni doğru bir şekilde yapılandırdığınızdan emin olun; bu, kaynakların belirli, potansiyel olarak tehlikeli işlevleri kullanmasını engelleyecektir.
  • Bilinmeyen kaynaklardan (haritalar dahil) gelen sistem kaynaklarına admin yetkisi verirken sıfır güven ilkelerini uygulayın.
  • Before running any resource you don't trust, analyze:
    • meta.xml of it, for possible hidden scripts lurking beneath other file extensions.
    • It's source code, for malicious logic.
  • Do not run/keep using compiled resources (scripts) of which legitimacy you aren't sure.

To ensure minimum damage when a cheater connects to your server:

  • When making scripts, remember to never trust data coming from a client.
  • While reviewing scripts for possible security holes. Look at any data coming from the client that is being trusted.
  • Any kind of data could be sent, hence server scripts which communicate with client by receiving data sent by players should validate it, before further use in latter parts of code. Mostly, it will be done either by setElementData or triggerServerEvent.
  • You shouldn't rely only on player serial, when it comes to processing crucial operations (auto-login/admin actions). Serials aren't guaranted to be unique or non-fakable. This is why you should put it behind account system, as important authentication factor (e.g: login & password).
  • Server-side logic can not be bypassed or tampered with (unless server is breached or when there is a bug in code, but that's whole different scenario) - use it to your advantage. In majority of cases, you will be able to perform security validations with no participation of client-side.
  • Using concept of “All parameters including source can be faked and should not be trusted. Global variable client can be trusted.” - gives you reliable assurance that player to which you refer (via client) is in fact, the one which really called event. This approach will protect you from situations where cheater can call (and process) admin events (e.g kick/ban player) by passing the actual admin (2nd argument in triggerServerEvent) - as a consequence of using wrong variable. To make sure you fully understood it, take a look at examples below:
--[[
	DON'T EVER DO THAT - THAT IS COMPLETELY WRONG AND INSECURE
	THE ISSUE: BY USING 'source' IN hasObjectPermissionTo YOU ARE LEAVING DOOR STRAIGHT OPEN FOR CHEATERS
]]

function onServerWrongAdminEvent(playerToBan)
	if (not client) then -- 'client' points to the player who triggered the event, and should be used as security measure (in order to prevent player faking)
		return false -- if this variable doesn't exists at the moment (for unknown reason, or it was the server who triggered this event), stop code execution
	end

	local defaultPermission = false -- do not allow action by default, see (defaultPermission): https://wiki.multitheftauto.com/wiki/HasObjectPermissionTo
	local canAdminBanPlayer = hasObjectPermissionTo(source, "function.banPlayer", defaultPermission) -- the vulnerability lies here...

	if (not canAdminBanPlayer) then -- if player doesn't have permissions
		return false -- don't do it
	end

	local validElement = isElement(playerToBan) -- check whether argument passed from client is an element

	if (not validElement) then -- it is not
		return false -- stop code processing
	end

	local elementType = getElementType(playerToBan) -- it's an element, so get it's type
	local playerType = (elementType == "player") -- make sure that it's a player

	if (not playerType) then -- it's not a player
		return false -- stop here
	end

	-- banPlayer(...) -- do what needs to be done
end
addEvent("onServerWrongAdminEvent", true)
addEventHandler("onServerWrongAdminEvent", root, onServerWrongAdminEvent)

--[[
	onServerCorrectAdminEvent IS PERFECTLY SECURED, AS IT SHOULD BE
	NO ISSUE HERE: WE'VE USED 'client' IN hasObjectPermissionTo WHICH MAKES IT SAFE FROM FAKING PLAYER WHO CALLED EVENT
]]

function onServerCorrectAdminEvent(playerToBan)
	if (not client) then -- 'client' points to the player who triggered the event, and should be used as security measure (in order to prevent player faking)
		return false -- if this variable doesn't exists at the moment (for unknown reason, or it was the server who triggered this event), stop code execution
	end

	local defaultPermission = false -- do not allow action by default, see (defaultPermission): https://wiki.multitheftauto.com/wiki/HasObjectPermissionTo
	local canAdminBanPlayer = hasObjectPermissionTo(client, "function.banPlayer", defaultPermission) -- is player allowed to do that?

	if (not canAdminBanPlayer) then -- if player doesn't have permissions
		return false -- don't do it
	end

	local validElement = isElement(playerToBan) -- check whether argument passed from client is an element

	if (not validElement) then -- it is not
		return false -- stop code processing
	end

	local elementType = getElementType(playerToBan) -- it's an element, so get it's type
	local playerType = (elementType == "player") -- make sure that it's a player

	if (not playerType) then -- it's not a player
		return false -- stop here
	end

	-- banPlayer(...) -- do what needs to be done
end
addEvent("onServerCorrectAdminEvent", true)
addEventHandler("onServerCorrectAdminEvent", root, onServerCorrectAdminEvent)

Securing setElementData

  • You should refrain from using element data everywhere, it should be only used when really necessary. It is advised to replace it with triggerClientEvent instead.
  • If you still insist on using it, it is recommended to set 4th argument in setElementData to false (disabling sync for this, certain data) and use subscriber mode - addElementDataSubscriber, for both security & performance reasons described in event section.
[[{{{image}}}|link=|]] Important Note: Disabling sync however, doesn't fully protect data key. It would be still vulnerable by default, but in this case you are not leaving it in plain sight. Using getAllElementData or digging in RAM wouldn't expose it, since it won't be synced to client in first place. Therefore, it needs to be added to anti-cheat as well.
  • All parameters including source can be faked and should not be trusted.
  • Global variable client can be trusted.

Click to collapse [-]
Server

Example of basic element data anti-cheat.

local function reportAndRevertDataChange(clientElement, sourceElement, dataKey, oldValue, newValue) -- helper function to log and revert changes
	local logClient = inspect(clientElement) -- in-depth view of player which forced element data sync
	local logSerial = getPlayerSerial(clientElement) or "N/A" -- client serial, or "N/A" if not possible, for some reason
	local logSource = tostring(sourceElement) -- element which received data
	local logOldValue = tostring(oldValue) -- old value
	local logNewValue = tostring(newValue) -- new value
	local logText = -- fill our report with data
		"=======================================\n"..
		"Detected element data abnormality:\n"..
		"Client: "..logClient.."\n"..
		"Client serial: "..logSerial.."\n"..
		"Source: "..logSource.."\n"..
		"Data key: "..dataKey.."\n"..
		"Old data value: "..logOldValue.."\n"..
		"New data value: "..logNewValue.."\n"..
		"======================================="

	local logVisibleTo = root -- specify who will see this log in console, in this case each player connected to server
	local hadData = (oldValue ~= nil) -- check if element had such data before

	if (hadData) then -- if element had such data before
		setElementData(sourceElement, dataKey, oldValue, true) -- revert changes, it will call onElementDataChange event, but will fail (stop) on first condition - because server (not client) forced change
	else
		removeElementData(sourceElement, dataKey) -- remove it completely
	end

	outputConsole(logText, logVisibleTo) -- print it to console

	return true -- all success
end

function onElementDataChangeBasicAC(dataKey, oldValue, newValue) -- the heart of our anti-cheat, which does all the magic security measurements
	if (not client) then -- check if data is coming from client
		return false -- if it's not, do not go further
	end

	local checkSpecialThing = (dataKey == "special_thing") -- compare whether dataKey matches "special_thing"
	local checkFlagWaving = (dataKey == "flag_waving") -- compare whether dataKey matches "flag_waving"

	if (checkSpecialThing) then -- if it does, do our security checks
		local invalidElement = (client ~= source) -- verify whether source element is different from player which changed data

		if (invalidElement) then -- if it's so
			reportAndRevertDataChange(client, source, dataKey, oldValue, newValue) -- revert data change, because "special_thing" can only be set for player himself
		end
	end

	if (checkFlagWaving) then -- if it does, do our security checks
		local playerVehicle = getPedOccupiedVehicle(client) -- get player's current vehicle
		local invalidVehicle = (playerVehicle ~= source) -- verify whether source element is different from player's vehicle

		if (invalidVehicle) then -- if it's so
			reportAndRevertDataChange(client, source, dataKey, oldValue, newValue) -- revert data change, because "flag_waving" can only be set for player's own vehicle
		end
	end
end
addEventHandler("onElementDataChange", root, onElementDataChangeBasicAC)
Click to collapse [-]
Server

Example of comfortable advanced element data anti-cheat.

--[[
	For maximum security set punishPlayerOnDetect, punishmentBan, allowOnlyProtectedKeys to true (as per default configuration)
	If allowOnlyProtectedKeys is enabled, do not forget to add every client-side element data key to protectedKeys table - otherwise you will face false-positives

	Anti-cheat (handleDataChange) table structure and it's options:

	["keyName"] = { -- name of key which would be protected
		onlyForPlayerHimself = true, -- enabling this (true) will make sure that this element data key can only be set on player who synced it (ignores onlyForOwnPlayerVeh and allowForElements), use false/nil to disable this
		onlyForOwnPlayerVeh = false, -- enabling this (true) will make sure that this element data key can only be set on player's current vehicle who synced it (ignores allowForElements), use false/nil to disable this
		allowForElements = { -- restrict this key for certain element type(s), set to false/nil or leave it empty to not check this (full list of element types: https://wiki.multitheftauto.com/wiki/GetElementsByType)
			["player"] = true,
			["ped"] = true,
			["vehicle"] = true,
			["object"] = true,
		},
		allowedDataTypes = { -- restrict this key for certain value type(s), set to false/nil or leave it empty to not check this
			["string"] = true,
			["number"] = true,
			["table"] = true,
			["boolean"] = true,
			["nil"] = true,
		},
		allowedStringLength = {1, 32}, -- if value is a string, then it's length must be in between (min-max), set it to false/nil to not check string length - do note that allowedDataTypes must contain ["string"] = true
		allowedTableLength = {1, 64}, -- if value is a table, then it's length must be in between (min-max), set it to false/nil to not check table length - do note that allowedDataTypes must contain ["table"] = true
		allowedNumberRange = {1, 128}, -- if value is a number, then it must be in between (min-max), set it to false/nil to not check number range - do note that allowedDataTypes must contain ["number"] = true
	}
]]

local punishPlayerOnDetect = true -- should player be punished upon detection (make sure that resource which runs this code has admin rights)
local punishmentBan = true -- only relevant if punishPlayerOnDetect is set to true; use true for ban or false for kick
local punishmentReason = "Altering element data" -- only relevant if punishPlayerOnDetect is set to true; reason which would be shown to punished player
local punishedBy = "Console" -- only relevant if punishPlayerOnDetect is set to true; who was responsible for punishing, as well shown to punished player
local banByIP = false -- only relevant if punishPlayerOnDetect and punishmentBan is set to true; banning by IP nowadays is not recommended (...)
local banByUsername = false -- community username - legacy thing, hence is set to false and should stay like that
local banBySerial = true -- only relevant if punishPlayerOnDetect and punishmentBan is set to true; (...) if there is a player serial to use instead
local banTime = 0 -- only relevant if punishPlayerOnDetect and punishmentBan is set to true; time in seconds, 0 for permanent
local allowOnlyProtectedKeys = true -- disallow (remove by using removeElementData, if it didn't existed before) every element data besides those given in protectedKeys table; in case someone wanted to flood server with garbage keys, which would be kept in memory until server restart or manual remove - setElementData(source, key, nil) won't remove it; it has to be removeElementData
local debugLevel = 4 -- this debug level allows to hide INFO: prefix, and use custom colors
local debugR = 255 -- debug message - red color
local debugG = 127 -- debug message - green color
local debugB = 0 -- debug message - blue color
local protectedKeys = {
	["vehicleNumber"] = { -- we want vehicleNumber to be set only on vehicles, with stricte numbers in range of 1-100
		allowForElements = {
			["vehicle"] = true,
		},
		allowedDataTypes = {
			["number"] = true,
		},
		allowedNumberRange = {1, 100},
	},
	["personalVehData"] = { -- we want be able to set personalVehData only on current vehicle, also it should be a string with length between 1-24
		onlyForOwnPlayerVeh = true,
		allowedDataTypes = {
			["string"] = true,
		},
		allowedStringLength = {1, 24},
	},
	-- perform security checks on keys stored in this table, in a convenient way
}

local function reportAndRevertDataChange(clientElement, sourceElement, dataKey, oldValue, newValue, failReason, forceRemove) -- helper function to log and revert changes
	local logClient = inspect(clientElement) -- in-depth view of player which forced element data sync
	local logSerial = getPlayerSerial(clientElement) or "N/A" -- client serial, or "N/A" if not possible, for some reason
	local logSource = inspect(sourceElement) -- in-depth view of element which received data
	local logOldValue = inspect(oldValue) -- in-depth view of old value
	local logNewValue = inspect(newValue) -- in-depth view of new value
	local logText = -- fill our report with data
		"*\n"..
		"Detected element data abnormality:\n"..
		"Client: "..logClient.."\n"..
		"Client serial: "..logSerial.."\n"..
		"Source: "..logSource.."\n"..
		"Data key: "..dataKey.."\n"..
		"Old data value: "..logOldValue.."\n"..
		"New data value: "..logNewValue.."\n"..
		"Fail reason: "..failReason.."\n"..
		"*"

	outputDebugString(logText, debugLevel, debugR, debugG, debugB) -- print it to debug

	if (forceRemove) then -- we don't want this element data key to exist at all
		removeElementData(sourceElement, dataKey) -- remove it

		return true -- return success and stop here, we don't need further checks
	end

	setElementData(sourceElement, dataKey, oldValue, true) -- revert changes, it will call onElementDataChange event, but will fail (stop) on first condition - because server (not client) forced change

	return true -- return success
end

local function handleDataChange(clientElement, sourceElement, dataKey, oldValue, newValue) -- the heart of our anti-cheat, which does all the magic security measurements, returns true if there was no altering from client (based on data from protectedKeys), false otherwise
	local protectedKey = protectedKeys[dataKey] -- look up whether key changed is stored in protectedKeys table

	if (not protectedKey) then -- if it's not

		if (allowOnlyProtectedKeys) then -- if we don't want garbage keys
			local failReason = "Key isn't present in protectedKeys" -- reason shown in report
			local forceRemove = true -- should key be completely removed

			reportAndRevertDataChange(clientElement, sourceElement, dataKey, oldValue, newValue, failReason, forceRemove) -- report accident, and handle (or not) this player

			return false -- return failure
		end

		return true -- this key isn't protected, let it through
	end

	local onlyForPlayerHimself = protectedKey.onlyForPlayerHimself -- if key has "self-set" lock
	local onlyForOwnPlayerVeh = protectedKey.onlyForOwnPlayerVeh -- if key has "self-vehicle" lock
	local allowForElements = protectedKey.allowForElements -- if key has element type check
	local allowedDataTypes = protectedKey.allowedDataTypes -- if key has allowed data type check

	if (onlyForPlayerHimself) then -- if "self-set" lock is active
		local matchingElement = (clientElement == sourceElement) -- verify whether player who set data is equal to element which received data

		if (not matchingElement) then -- if it's not matching
			local failReason = "Can only set on player himself" -- reason shown in report
			local forceRemove = false -- should key be completely removed

			reportAndRevertDataChange(clientElement, sourceElement, dataKey, oldValue, newValue, failReason, forceRemove) -- report accident, and handle (or not) this player

			return false -- return failure
		end
	end

	if (onlyForOwnPlayerVeh) then -- if "self-vehicle" lock is active
		local playerVehicle = getPedOccupiedVehicle(clientElement) -- get current vehicle of player which set data
		local matchingVehicle = (playerVehicle == sourceElement) -- check whether it matches the one which received data

		if (not matchingVehicle) then -- if it doesn't match
			local failReason = "Can only set on player's own vehicle" -- reason shown in report
			local forceRemove = false -- should key be completely removed

			reportAndRevertDataChange(clientElement, sourceElement, dataKey, oldValue, newValue, failReason, forceRemove) -- report accident, and handle (or not) this player

			return false -- return failure
		end
	end

	if (allowForElements) then -- check if it's one of them
		local elementType = getElementType(sourceElement) -- get type of element whose data changed
		local matchingElementType = allowForElements[elementType] -- verify whether it's allowed

		if (not matchingElementType) then -- this isn't matching
			local failReason = "Invalid element type" -- reason shown in report
			local forceRemove = false -- should key be completely removed

			reportAndRevertDataChange(clientElement, sourceElement, dataKey, oldValue, newValue, failReason, forceRemove) -- report accident, and handle (or not) this player

			return false -- return failure
		end
	end

	if (allowedDataTypes) then -- if there's allowed data types
		local valueType = type(newValue) -- get data type of value
		local matchingType = allowedDataTypes[valueType] -- check if it's one of allowed

		if (not matchingType) then -- if it's not then
			local failReason = "Invalid data type" -- reason shown in report
			local forceRemove = false -- should key be completely removed

			reportAndRevertDataChange(clientElement, sourceElement, dataKey, oldValue, newValue, failReason, forceRemove) -- report accident, and handle (or not) this player

			return false -- return failure
		end

		local allowedStringLength = protectedKey.allowedStringLength -- if key has specified string length check
		local dataString = (valueType == "string") -- make sure it's a string

		if (allowedStringLength and dataString) then -- if we should check string length
			local minLength = allowedStringLength[1] -- retrieve min length
			local maxLength = allowedStringLength[2] -- retrieve max length
			local stringLength = utf8.len(newValue) -- get length of data string
			local matchingLength = (stringLength >= minLength) and (stringLength <= maxLength) -- compare whether value fits in between

			if (not matchingLength) then -- if it doesn't
				local failReason = "Invalid string length (must be between "..minLength.."-"..maxLength..")" -- reason shown in report
				local forceRemove = false -- should key be completely removed

				reportAndRevertDataChange(clientElement, sourceElement, dataKey, oldValue, newValue, failReason, forceRemove) -- report accident, and handle (or not) this player

				return false -- return failure
			end
		end

		local allowedTableLength = protectedKey.allowedTableLength -- if key has table length check
		local dataTable = (valueType == "table") -- make sure it's a table

		if (allowedTableLength and dataTable) then -- if we should check table length
			local minLength = allowedTableLength[1] -- retrieve min length
			local maxLength = allowedTableLength[2] -- retrieve max length
			local minLengthAchieved = false -- variable which checks 'does minimum length was achieved'
			local maxLengthExceeded = false -- variable which checks 'does length has exceeds more than allowed maximum'
			local tableLength = 0 -- store initial table length

			for _, _ in pairs(newValue) do -- loop through whole table
				tableLength = (tableLength + 1) -- add + 1 on each table entry
				minLengthAchieved = (tableLength >= minLength) -- is length bigger or at very minimum we require
				maxLengthExceeded = (tableLength > maxLength) -- does table exceeded more than max length?

				if (maxLengthExceeded) then -- it is bigger than it should be
					break -- break the loop (due of condition above being worthy, it makes no point to count further and waste CPU, on a table which potentially could have huge amount of entries)
				end
			end

			local matchingLength = (minLengthAchieved and not maxLengthExceeded) -- check if min length has been achieved, and make sure that it doesn't go beyond max length

			if (not matchingLength) then -- this table doesn't match requirements
				local failReason = "Invalid table length (must be between "..minLength.."-"..maxLength..")" -- reason shown in report
				local forceRemove = false -- should key be completely removed

				reportAndRevertDataChange(clientElement, sourceElement, dataKey, oldValue, newValue, failReason, forceRemove) -- report accident, and handle (or not) this player

				return false -- return failure
			end
		end

		local allowedNumberRange = protectedKey.allowedNumberRange -- if key has allowed number range check
		local dataNumber = (valueType == "number") -- make sure it's a number

		if (allowedNumberRange and dataNumber) then -- if we should check number range
			local minRange = allowedNumberRange[1] -- retrieve min number range
			local maxRange = allowedNumberRange[2] -- retrieve max number range
			local matchingRange = (newValue >= minRange) and (newValue <= maxRange) -- compare whether value fits in between

			if (not matchingRange) then -- if it doesn't
				local failReason = "Invalid number range (must be between "..minRange.."-"..maxRange..")" -- reason shown in report
				local forceRemove = false -- should key be completely removed

				reportAndRevertDataChange(clientElement, sourceElement, dataKey, oldValue, newValue, failReason, forceRemove) -- report accident, and handle (or not) this player

				return false -- return failure
			end
		end
	end

	return true -- security checks passed, we are all clear with this data key
end

function onElementDataChangeAdvancedAC(dataKey, oldValue, newValue) -- this event makes use of handleDataChange, the code was split for better readability
	if (not client) then -- check if data is coming from client
		return false -- if it's not, do not continue
	end

	local approvedChange = handleDataChange(client, source, dataKey, oldValue, newValue) -- run our security checks

	if (approvedChange) then -- it's all cool and good
		return false -- we don't need further action
	end

	if (not punishPlayerOnDetect) then -- we don't want to punish player for some reason
		return false -- so stop here
	end
		
	if (punishmentBan) then -- if it's ban
		banPlayer(client, banByIP, banByUsername, banBySerial, punishedBy, punishmentReason, banTime) -- remove his presence from server
	else -- otherwise
		kickPlayer(client, punishedBy, punishmentReason) -- simply kick player out of server
	end
end
addEventHandler("onElementDataChange", root, onElementDataChangeAdvancedAC)

Securing triggerServerEvent

  • All parameters including source can be faked and should not be trusted.
  • Global variable client can be trusted.
  • Admin styled events should be verifying player (client) ACL rights, either by isObjectInACLGroup or hasObjectPermissionTo.
  • Do not use the same name for your custom event as MTA native server events (which aren't remotely triggerable by default), e.g: onPlayerLogin; doing so would open door for cheaters manipulations.
  • Be aware to which players event is sent via triggerClientEvent. For both security & performance reasons, admin like events should be received by admins only (to prevent confidential data being accessed), in the same time you shouldn't send each event to everyone on server (e.g: login success event which hides login panel for certain player). triggerClientEvent allows you to specify the event receiver as first (optional) argument. It defaults to root, meaning if you don't specify it, it will be sent to everyone connected to server - even those who are still downloading server cache (which results in Server triggered clientside event eventName, but event is not added clientside.). You can either pass player element or table with receivers:
local playersToReceiveEvent = {player1, player2, player3} -- each playerX is player element

triggerClientEvent(playersToReceiveEvent, ...) -- do not forget to fill the latter part of arguments

Click to collapse [-]
Server

Example of comfortable anti-cheat function designed for events, used for data validation for both normal, and admin events which are called from client-side.

--[[
	For maximum security set punishPlayerOnDetect, punishmentBan to true (as per default configuration)

	Anti-cheat (processServerEventData) table structure and it's options:

	checkACLGroup = { -- check whether player who called event belongs to at least one group below, set to false/nil to not check this
		"Admin",
	},
	checkPermissions = { -- check whether player who called event has permission to at least one thing below, set to false/nil to not check this
		"function.kickPlayer",
	},
	checkEventData = {
		{
			debugData = "source", -- optional details for report shown in debug message
			eventData = source, -- data we want to verify
			equalTo = client, -- compare whether eventData == equalTo
			allowedElements = { -- restrict eventData to be certain element type(s), set to false/nil or leave it empty to not check this (full list of element types: https://wiki.multitheftauto.com/wiki/GetElementsByType)
				["player"] = true,
				["ped"] = true,
				["vehicle"] = true,
				["object"] = true,
			},
			allowedDataTypes = { -- restrict eventData to be certain value type(s), set to false/nil or leave it empty to not check this
				["string"] = true,
				["number"] = true,
				["table"] = true,
				["boolean"] = true,
				["nil"] = true,
			},
			allowedStringLength = {1, 32}, -- if eventData is a string, then it's length must be in between (min-max), set it to false/nil to not check string length - do note that allowedDataTypes must contain ["string"] = true
			allowedTableLength = {1, 64}, -- if eventData is a table, then it's length must be in between (min-max), set it to false/nil to not check table length - do note that allowedDataTypes must contain ["table"] = true
			allowedNumberRange = {1, 128}, -- if eventData is a number, then it must be in between (min-max), set it to false/nil to not check number range - do note that allowedDataTypes must contain ["number"] = true
		},
	},
]]

local punishPlayerOnDetect = true -- should player be punished upon detection (make sure that resource which runs this code has admin rights)
local punishmentBan = true -- only relevant if punishPlayerOnDetect is set to true; use true for ban or false for kick
local punishmentReason = "Altering server event data" -- only relevant if punishPlayerOnDetect is set to true; reason which would be shown to punished player
local punishedBy = "Console" -- only relevant if punishPlayerOnDetect is set to true; who was responsible for punishing, as well shown to punished player
local banByIP = false -- only relevant if punishPlayerOnDetect and punishmentBan is set to true; banning by IP nowadays is not recommended (...)
local banByUsername = false -- community username - legacy thing, hence is set to false and should stay like that
local banBySerial = true -- only relevant if punishPlayerOnDetect and punishmentBan is set to true; (...) if there is a player serial to use instead
local banTime = 0 -- only relevant if punishPlayerOnDetect and punishmentBan is set to true; time in seconds, 0 for permanent
local debugLevel = 4 -- this debug level allows to hide INFO: prefix, and use custom colors
local debugR = 255 -- debug message - red color
local debugG = 127 -- debug message - green color
local debugB = 0 -- debug message - blue color

function processServerEventData(clientElement, sourceElement, serverEvent, securityChecks) -- the heart of our anti-cheat, which does all the magic security measurements, returns true if there was no altering from client (based on data from securityChecks), false otherwise
	if (not securityChecks) then -- if we haven't passed any security checks
		return true -- nothing to check, let code go further
	end
	
	if (not clientElement) then -- if client variable isn't available for some reason (although it should never happen)
		local failReason = "Client variable not present" -- reason shown in report
		local skipPunishment = true -- should server skip punishment

		reportAndHandleEventAbnormality(clientElement, sourceElement, serverEvent, failReason, skipPunishment) -- report accident, and handle (or not) this player

		return false -- return failure
	end

	local checkACLGroup = securityChecks.checkACLGroup -- if there's any ACL groups to check
	local checkPermissions = securityChecks.checkPermissions -- if there's any permissions to check
	local checkEventData = securityChecks.checkEventData -- if there's any data checks

	if (checkACLGroup) then -- let's check player ACL groups
		local playerAccount = getPlayerAccount(clientElement) -- get current account of player
		local guestAccount = isGuestAccount(playerAccount) -- if account is guest (meaning player is not logged in)

		if (guestAccount) then -- it's the case
			local failReason = "Can't retrieve player login - guest account" -- reason shown in report
			local skipPunishment = true -- should server skip punishment

			reportAndHandleEventAbnormality(clientElement, sourceElement, serverEvent, failReason, skipPunishment) -- report accident, and handle (or not) this player

			return false -- return failure
		end

		local accountName = getAccountName(playerAccount) -- get name of player's current account
		local aclString = "user."..accountName -- format it for further use in isObjectInACLGroup function

		for groupID = 1, #checkACLGroup do -- iterate over table of given groups
			local groupName = checkACLGroup[groupID] -- get each group name
			local aclGroup = aclGetGroup(groupName) -- check if such group exists

			if (not aclGroup) then -- it doesn't
				local failReason = "ACL group '"..groupName.."' is missing" -- reason shown in report
				local skipPunishment = true -- should server skip punishment

				reportAndHandleEventAbnormality(clientElement, sourceElement, serverEvent, failReason, skipPunishment) -- report accident, and handle (or not) this player

				return false -- return failure
			end

			local playerInACLGroup = isObjectInACLGroup(aclString, aclGroup) -- check if player belong to the group

			if (playerInACLGroup) then -- yep, it's the case
				return true -- so it's a success
			end
		end

		local failReason = "Player doesn't belong to any given ACL group" -- reason shown in report
		local skipPunishment = true -- should server skip punishment

		reportAndHandleEventAbnormality(clientElement, sourceElement, serverEvent, failReason, skipPunishment) -- report accident, and handle (or not) this player

		return false -- return failure
	end

	if (checkPermissions) then -- check if player has at least one desired permission
		local allowedByDefault = false -- does he have access by default

		for permissionID = 1, #checkPermissions do -- iterate over all permissions
			local permissionName = checkPermissions[permissionID] -- get permission name
			local hasPermission = hasObjectPermissionTo(clientElement, permissionName, allowedByDefault) -- check whether player is allowed to perform certain action

			if (hasPermission) then -- if player has access
				return true -- one is available (and enough), server won't bother to check others (as return keywords also breaks loop)
			end
		end

		local failReason = "Not enough permissions" -- reason shown in report
		local skipPunishment = true -- should server skip punishment

		reportAndHandleEventAbnormality(clientElement, sourceElement, serverEvent, failReason, skipPunishment) -- report accident, and handle (or not) this player

		return false -- return failure
	end

	if (checkEventData) then -- if there is some data to verify

		for dataID = 1, #checkEventData do -- iterate over each of data
			local dataToCheck = checkEventData[dataID] -- get each data set
			local eventData = dataToCheck.eventData -- this is the one we'll be verifying
			local equalTo = dataToCheck.equalTo -- we want to compare whether eventData == equalTo
			local allowedElements = dataToCheck.allowedElements -- check whether is element, and whether belongs to certain element types
			local allowedDataTypes = dataToCheck.allowedDataTypes -- do we restrict data to be certain type?
			local debugData = dataToCheck.debugData -- additional helper data
			local debugText = debugData and " ("..debugData..")" or "" -- if it's present, format it nicely

			if (equalTo) then -- equal check exists
				local matchingData = (eventData == equalTo) -- compare whether those two values are equal

				if (not matchingData) then -- they aren't
					local failReason = "Data isn't equal @ argument "..dataID..debugText -- reason shown in report
					local skipPunishment = false -- should server skip punishment

					reportAndHandleEventAbnormality(clientElement, sourceElement, serverEvent, failReason, skipPunishment) -- report accident, and handle (or not) this player

					return false -- return failure
				end
			end

			if (allowedElements) then -- we do check whether is an element, and belongs to at least one given in the list
				local validElement = isElement(eventData) -- check if it's actual element

				if (not validElement) then -- it's not
					local failReason = "Data isn't element @ argument "..dataID..debugText -- reason shown in report
					local skipPunishment = false -- should server skip punishment

					reportAndHandleEventAbnormality(clientElement, sourceElement, serverEvent, failReason, skipPunishment) -- report accident, and handle (or not) this player

					return false -- return failure
				end

				local elementType = getElementType(eventData) -- it's element, so we want to know it's type
				local matchingElementType = allowedElements[elementType] -- verify whether it's allowed

				if (not matchingElementType) then -- it's not allowed
					local failReason = "Invalid element type @ argument "..dataID..debugText -- reason shown in report
					local skipPunishment = false -- should server skip punishment

					reportAndHandleEventAbnormality(clientElement, sourceElement, serverEvent, failReason, skipPunishment) -- report accident, and handle (or not) this player

					return false -- return failure
				end
			end

			if (allowedDataTypes) then -- let's check allowed data types
				local dataType = type(eventData) -- get data type
				local matchingType = allowedDataTypes[dataType] -- verify whether it's allowed

				if (not matchingType) then -- it isn't
					local failReason = "Invalid data type @ argument "..dataID..debugText -- reason shown in report
					local skipPunishment = false -- should server skip punishment

					reportAndHandleEventAbnormality(clientElement, sourceElement, serverEvent, failReason, skipPunishment) -- report accident, and handle (or not) this player

					return false -- return failure
				end

				local allowedStringLength = dataToCheck.allowedStringLength -- if data has string length check
				local dataString = (dataType == "string") -- make sure it's a string

				if (allowedStringLength and dataString) then -- if we should check string length
					local minLength = allowedStringLength[1] -- retrieve min length
					local maxLength = allowedStringLength[2] -- retrieve max length
					local stringLength = utf8.len(eventData) -- get length of data string
					local matchingLength = (stringLength >= minLength) and (stringLength <= maxLength) -- compare whether value fits in between

					if (not matchingLength) then -- if it doesn't
						local failReason = "Invalid string length (must be between "..minLength.."-"..maxLength..") @ argument "..dataID..debugText -- reason shown in report
						local skipPunishment = false -- should server skip punishment

						reportAndHandleEventAbnormality(clientElement, sourceElement, serverEvent, failReason, skipPunishment) -- report accident, and handle (or not) this player

						return false -- return failure
					end
				end

				local allowedTableLength = dataToCheck.allowedTableLength -- if data has table length check
				local dataTable = (dataType == "table") -- make sure it's a table

				if (allowedTableLength and dataTable) then -- if we should check table length
					local minLength = allowedTableLength[1] -- retrieve min length
					local maxLength = allowedTableLength[2] -- retrieve max length
					local minLengthAchieved = false -- variable which checks 'does minimum length was achieved'
					local maxLengthExceeded = false -- variable which checks 'does length has exceeds more than allowed maximum'
					local tableLength = 0 -- store initial table length

					for _, _ in pairs(eventData) do -- loop through whole table
						tableLength = (tableLength + 1) -- add + 1 on each table entry
						minLengthAchieved = (tableLength >= minLength) -- is length bigger or at very minimum we require
						maxLengthExceeded = (tableLength > maxLength) -- does table exceeded more than max length?

						if (maxLengthExceeded) then -- it is bigger than it should be
							break -- break the loop (due of condition above being worthy, it makes no point to count further and waste CPU, on a table which potentially could have huge amount of entries)
						end
					end

					local matchingLength = (minLengthAchieved and not maxLengthExceeded) -- check if min length has been achieved, and make sure that it doesn't go beyond max length

					if (not matchingLength) then -- this table doesn't match requirements
						local failReason = "Invalid table length (must be between "..minLength.."-"..maxLength..") @ argument "..dataID..debugText -- reason shown in report
						local skipPunishment = false -- should server skip punishment

						reportAndHandleEventAbnormality(clientElement, sourceElement, serverEvent, failReason, skipPunishment) -- report accident, and handle (or not) this player

						return false -- return failure
					end
				end

				local allowedNumberRange = dataToCheck.allowedNumberRange -- if data has number range check
				local dataNumber = (dataType == "number") -- make sure it's a number

				if (allowedNumberRange and dataNumber) then -- if we should check number range
					local minRange = allowedNumberRange[1] -- retrieve min number range
					local maxRange = allowedNumberRange[2] -- retrieve max number range
					local matchingRange = (eventData >= minRange) and (eventData <= maxRange) -- compare whether value fits in between

					if (not matchingRange) then -- if it doesn't
						local failReason = "Invalid number range (must be between "..minRange.."-"..maxRange..") @ argument "..dataID..debugText -- reason shown in report
						local skipPunishment = false -- should server skip punishment

						reportAndHandleEventAbnormality(clientElement, sourceElement, serverEvent, failReason, skipPunishment) -- report accident, and handle (or not) this player

						return false -- return failure
					end
				end
			end
		end
	end

	return true -- security checks passed, we are all clear with this event call
end

function reportAndHandleEventAbnormality(clientElement, sourceElement, serverEvent, failReason, skipPunishment) -- helper function to log and handle accidents
	local logClient = inspect(clientElement) -- in-depth view player which called event
	local logSerial = getPlayerSerial(clientElement) or "N/A" -- client serial, or "N/A" if not possible, for some reason
	local logSource = inspect(sourceElement) -- in-depth view of source element
	local logText = -- fill our report with data
		"*\n"..
		"Detected event abnormality:\n"..
		"Client: "..logClient.."\n"..
		"Client serial: "..logSerial.."\n"..
		"Source: "..logSource.."\n"..
		"Event: "..serverEvent.."\n"..
		"Reason: "..failReason.."\n"..
		"*"

	outputDebugString(logText, debugLevel, debugR, debugG, debugB) -- print it to debug

	if (not punishPlayerOnDetect or skipPunishment) then -- we don't want to punish player for some reason
		return true -- stop here
	end
		
	if (punishmentBan) then -- if it's ban
		banPlayer(clientElement, banByIP, banByUsername, banBySerial, punishedBy, punishmentReason, banTime) -- remove his presence from server
	else -- otherwise
		kickPlayer(clientElement, punishedBy, punishmentReason) -- simply kick player out of server
	end

	return true -- all done, report success
end

function onServerEvent(clientData)
	--[[
		Assume this server event (function) is called in such way:

		local dataToPass = 10

		triggerServerEvent("onServerEvent", localPlayer, dataToPass)
	]]

	local shouldProcessServerCode = processServerEventData(
		client, -- client element - responsible for calling event
		source, -- source element - passed in triggerServerEvent (as 2nd argument)
		eventName, -- name of event - in this case 'onServerEvent'
		{
			checkEventData = { -- we want to verify everything what comes from client
				{
					eventData = source, -- first to check, source variable
					equalTo = client, -- we want to check whether it matches player who called event
					debugData = "source", -- helper details which would be shown in report
				},
				{
					eventData = clientData, -- let's check the data which client sent to us
					allowedDataTypes = {
						["number"] = true, -- we want it to be only number
					},
					allowedNumberRange = {1, 100}, -- in range of 1 to 100
					debugData = "clientData", -- if something goes wrong, let server know where (it will appear in debug report)
				},
			},
		}
	)

	if (not shouldProcessServerCode) then -- something isn't right, no green light for processing code behind this scope
		return false -- stop code execution
	end

	-- do code as usual
end
addEvent("onServerEvent", true)
addEventHandler("onServerEvent", root, onServerEvent)

function onServerAdminEvent(playerToBan)
	--[[
		Assume this server admin event (function) is called in such way:

		local playerToBan = getPlayerFromName("playerToBan")

		triggerServerEvent("onServerAdminEvent", localPlayer, playerToBan)
	]]

	local shouldProcessServerCode = processServerEventData(
		client, -- client element - responsible for calling event
		source, -- source element - passed in triggerServerEvent (as 2nd argument)
		eventName, -- name of event - in this case 'onServerAdminEvent'
		{
			checkACLGroup = { -- we need to check whether player who called event belongs to ACL groups
				"Admin", -- in this case admin group
			},
			checkEventData = { -- we want to verify everything what comes from client
				{
					eventData = source, -- first to check, source variable
					equalTo = client, -- we want to check whether it matches player who called event
					debugData = "source", -- helper details which would be shown in report
				},
				{
					eventData = playerToBan, -- let's check the data which client sent to us
					allowedDataTypes = {
						["player"] = true, -- we want it to be player
					},
					debugData = "playerToBan", -- if something goes wrong, let server know where (it will appear in debug report)
				},
			},
		}
	)

	if (not shouldProcessServerCode) then -- something isn't right, no green light for processing code behind this scope
		return false -- stop code execution
	end

	-- do code as usual
end
addEvent("onServerAdminEvent", true)
addEventHandler("onServerAdminEvent", root, onServerAdminEvent)

Securing server-only events

  • It is very important to disable remote triggering ability in addEvent, to prevent calling server-side only events from client-side.
  • Admin styled events should be verifying player ACL rights, either by isObjectInACLGroup or hasObjectPermissionTo.

Click to collapse [-]
Server

This example shows how you should make event server-side only.

function onServerSideOnlyEvent()
	-- do some server-side stuff
end
addEvent("onServerSideOnlyEvent", false) -- set second argument (allowRemoteTriger) to false, so it can't be called from client
addEventHandler("onServerSideOnlyEvent", root, onServerSideOnlyEvent) -- associate our event with function onServerSideOnlyEvent

Securing projectiles & explosions

This section (and code is work in progress) - use at your own risk.


Click to expand [+]
Server
Click to expand [+]
Server
Click to expand [+]
Server

Handling non-registered events

See: onPlayerTriggerInvalidEvent

Handling events spam

See: onPlayerTriggerEventThreshold